EPC1213PI8

Configuration PROMs For FPGAs Overview

The Altera EPC1213PI8 is a serial configuration memory device designed for SRAM-based programmable logic. It stores configuration data for APEX II, APEX 20K, Mercury, ACEX 1K, and FLEX devices. The component operates at a maximum frequency of 6 MHz with a storage capacity of 212 kbit. It supports 5 V and 3.3 V power supplies and features low current consumption during configuration and near-zero standby current. The device utilizes an easy-to-use 4-pin interface and is housed in an 8-pin plastic dual in-line package (PDIP).

Configuration PROMs For FPGAs Feature Summary

• Serial device family for configuring APEX II, APEX 20K, Mercury, ACEX 1K, and FLEX devices.
• Easy-to-use 4-pin interface to APEX II, APEX 20K, Mercury, ACEX, and FLEX devices.
• Low current during configuration and near-zero standby current.

Configuration PROMs For FPGAs Applications

• Configuration of APEX II programmable logic devices.
• Configuration of APEX 20K series devices.
• Configuration of Mercury programmable logic devices.
• Configuration of ACEX 1K programmable logic devices.
• Configuration of FLEX 6000, FLEX 10KE, and FLEX 10KA devices.

Configuration PROMs For FPGAs Procurement Notes

Verify the specific suffix 'PI8' against official datasheets to confirm the PDIP-8 package variant. Confirm RoHS compliance status as legacy documentation may vary. Check for end-of-life notifications or discontinuance notices from Intel/Altera. Ensure programming hardware compatibility with Master Programming Unit or third-party programmers like Data I/O. Validate voltage requirements for your target system before procurement.

Configuration PROMs For FPGAs Selection Notes

Select this component when configuring older Altera SRAM-based families such as APEX, Mercury, ACEX, and FLEX. Choose the PDIP-8 package if through-hole mounting is required for the design. Verify that the 212 kbit capacity meets the bitstream size of the target FPGA. Ensure the design supports the 4-pin serial interface protocol. Consider newer configuration devices if migrating to modern FPGA families.

Configuration PROMs For FPGAs Part Context

The EPC1213 belongs to the EPC (Erasable Programmable Configuration) device family, which provides non-volatile storage for SRAM-based FPGAs. These devices ensure configuration data persists across power cycles. The EPC1213 specifically targets legacy Altera architectures. It is distinct from reprogrammable Flash devices like the EPC2. The part is categorized under mature or discontinued products in current Intel portfolios.

Configuration PROMs For FPGAs Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation. Legacy configuration devices often require exact pin-compatible replacements or adapter solutions. Consult Intel's product transition guides for migration paths from legacy EPC devices to modern configuration controllers.