EPM2210GF256C3

Complex Programmable Logic Devices Overview

The Altera EPM2210GF256C3 is a Complex Programmable Logic Device (CPLD) belonging to the MAX II family. It features 2210 logic elements and 1700 macrocells, housed in a 256-pin FineLine BGA package. The device supports System In-Programmability (SIPI) via its non-volatile Flash memory technology, enabling instant-on functionality without external configuration devices. Key electrical parameters include a maximum propagation delay of 7 ns and an internal supply voltage range of 1.71V to 1.89V. It operates within a commercial temperature range of 0°C to 70°C and provides 204 I/O pins for system interfacing.

Complex Programmable Logic Devices Feature Summary

• MAX II family architecture with 2210 logic elements and 1700 macrocells
• Non-volatile Flash memory for instant-on operation and SIPI support
• 256-pin FineLine BGA package with 204 available I/Os
• Maximum propagation delay of 7 ns

Complex Programmable Logic Devices Applications

• General-purpose digital logic replacement
• Interface bridging between different voltage domains
• Address decoding and control logic in embedded systems

Complex Programmable Logic Devices Procurement Notes

Verify the specific suffix 'C3' against official Altera documentation to confirm the exact speed grade and temperature rating, as datasheets often list 'C5N' variants. Ensure compatibility with Quartus Prime software versions supporting the MAX II family. Check for RoHS compliance status and moisture sensitivity level (MSL 3) requirements during storage and handling.

Complex Programmable Logic Devices Selection Notes

Select this component when non-vatility and instant-on capability are required, eliminating the need for external configuration EEPROMs. Compare the 2210 logic element count against design complexity; for larger designs, consider the MAX V or Cyclone series. Verify that the 256-FBGA footprint fits the PCB layout constraints and that the 7 ns delay meets timing requirements.

Complex Programmable Logic Devices Part Context

The EPM2210GF256C3 is part of the broader MAX II product line, which succeeded earlier MAX 7000/9000 families by integrating Flash memory directly into the CPLD structure. This integration reduced board space and power consumption compared to SRAM-based FPGAs requiring external configuration. The MAX II series remains relevant for cost-sensitive applications needing moderate logic density with persistent configuration.

Complex Programmable Logic Devices Replacement Considerations

Direct pin-to-pin replacements may be limited due to package variations. Equivalent logic density can be found in the EPM240 series (higher density) or EPM1270 series (lower density), though pinouts and I/O counts differ. Software migration from older MAX families may require design adjustments.