EPM570ZM100I8N

Complex Programmable Logic Devices Overview

The Altera EPM570ZM100I8N is a Complex Programmable Logic Device (CPLD) belonging to the MAX II family. It features 440 macrocells, 57 logic array blocks (LABs), and 76 I/O pins housed in a 100-pin BGA package. The device operates at a supply voltage of 1.8 V with a maximum frequency of 152 MHz and a propagation delay of 9 ns. It utilizes Flash memory for non-volatile storage and supports system-in-system programming via JTAG.

Complex Programmable Logic Devices Feature Summary

• Contains 440 macrocells and 57 LABs within a 100-pin BGA-100 package
• Operates at 1.8 V supply voltage with 76 available I/O lines
• Supports System-In-System Programming (SISP) using JTAG interface
• Features Flash-based non-volatile configuration memory

Complex Programmable Logic Devices Applications

• General-purpose digital logic implementation
• Interface bridging between different voltage domains
• Address decoding and control logic generation
• State machine design for embedded systems

Complex Programmable Logic Devices Procurement Notes

Verify the specific suffix 'I8N' against official Intel/Altera documentation to confirm the industrial temperature range (-40°C to +85°C) and RoHS compliance status. Ensure that the 1.8V operating requirement aligns with the target board's power delivery infrastructure before procurement.

Complex Programmable Logic Devices Selection Notes

Select this component when a low-power 1.8V CPLD with moderate density is required. Compare against the EPM570M series if higher speed (5.4 ns delay) or dual-voltage support (2.5V/3.3V) is necessary instead of the fixed 1.8V architecture found in the Z-series.

Complex Programmable Logic Devices Part Context

This part belongs to the MAX II family of CPLDs, which are designed for cost-sensitive applications requiring low power consumption. The 'Z' suffix typically denotes the 1.8V variant within the EPM570 lineup, distinguishing it from the standard M-series parts that support 2.5V or 3.3V operation.

Complex Programmable Logic Devices Replacement Considerations

The EPM570M100I5N is a related MAX II device but operates at 2.5V/3.3V with faster 5.4 ns delay. Verify voltage compatibility and timing requirements before substituting, as the electrical characteristics differ significantly from the 1.8V EPM570ZM100I8N.