H11L1W

$0.59

Description：OPTOISO 5.3KV OPN COLL 6-DIP
Series：-
Mfr：onsemi
Package：Tube

SKU:67cca322bb06 Category: Logic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

H11L1W is listed in the Logic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISO 5.3KV OPN COLL 6-DIP. Review the specifications below when checking this part for your BOM.

Logic Output Optoisolators specifications for H11L1W

Description：OPTOISO 5.3KV OPN COLL 6-DIP
Series：-
Mfr：onsemi
Package：Tube
Number of Channels：1
Inputs - Side 1/Side 2：1/0
Voltage - Isolation：5300Vrms
Common Mode Transient Immunity (Min)：-
Input Type：DC
Output Type：Open Collector
Current - Output / Channel：50 mA
Data Rate：1MHz
Propagation Delay tpLH / tpHL (Max)：-
Rise / Fall Time (Typ)：-
Voltage - Forward (Vf) (Typ)：-
Current - DC Forward (If) (Max)：1.6mA
Voltage - Supply：-
Operating Temperature：-
Mounting Type：Through Hole
Package / Case：6-DIP (0.400", 10.16mm)
Supplier Device Package：6-DIP
Grade：-
Qualification：-

Logic Output Optoisolators datasheet and documents for H11L1W

H11L1W

Logic Output Optoisolators Overview

The onsemi H11L1W is a single-channel logic output optoisolator housed in a 6-pin DIP package. It features a DC input side with a maximum forward current of 10mA and a typical forward voltage of 1.5V. The output side utilizes an open collector configuration capable of handling up to 50mA. Key electrical specifications include a 5300Vrms isolation voltage, a data rate of 1MHz, and a common-mode transient immunity (CMTI) rating.

Logic Output Optoisolators Feature Summary

Integrates a high-efficiency GaAs infrared LED emitter with an open-collector phototransistor detector for signal transmission.
Designed specifically for wide Schmitt trigger outputs to ensure clean digital signal transitions.
Provides robust galvanic isolation between input and output circuits via a dielectric barrier.

Logic Output Optoisolators Applications

Microprocessor system interface isolation
Logic level translation between different voltage domains
Solid-state relay driver circuits

Logic Output Optoisolators Procurement Notes

Verify the specific suffix 'W' against the latest datasheet to confirm pinout and packaging dimensions, as variations exist within the H11L family. Ensure compliance with RoHS directives if required by the end application, noting that older revisions may differ. Cross-reference the manufacturer part number with authorized distributors to avoid counterfeit components.

Logic Output Optoisolators Selection Notes

Select this component when a dedicated logic output with Schmitt trigger characteristics is required for noise immunity. It is suitable for applications needing moderate speed (1MHz) and high isolation voltage. Compare against the H11L2 variant if higher CMTI or different output configurations are needed. Verify thermal management requirements for the DIP package in enclosed designs.

Logic Output Optoisolators Part Context

The H11L1W belongs to the H11L series of logic output optocouplers from onsemi. This series is characterized by its ability to drive standard logic families directly. It serves as a bridge between low-voltage control circuits and higher-voltage load sides, offering electrical safety through physical separation of circuits.