HCPL-270L-500E

$1.97

Description：OPTOISO 3.75KV 1CH DARL 8-DIP GW
Series：-
Mfr：Broadcom Limited
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:845a2913693b Category: Transistor, Photovoltaic Output Optoisolators Brand: Broadcom Limited

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

HCPL-270L-500E is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Broadcom Limited. Its product description is OPTOISO 3.75KV 1CH DARL 8-DIP GW. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for HCPL-270L-500E

Description：OPTOISO 3.75KV 1CH DARL 8-DIP GW
Series：-
Mfr：Broadcom Limited
Package：Tape & Reel (TR),Cut Tape (CT)
Number of Channels：1
Voltage - Isolation：3750Vrms
Current Transfer Ratio (Min)：300% @ 1.6mA
Current Transfer Ratio (Max)：2600% @ 1.6mA
Turn On / Turn Off Time (Typ)：25µs, 50µs
Rise / Fall Time (Typ)：-
Input Type：DC
Output Type：Darlington
Voltage - Output (Max)：7V
Current - Output / Channel：60mA
Voltage - Forward (Vf) (Typ)：1.5V
Current - DC Forward (If) (Max)：20 mA
Vce Saturation (Max)：-
Operating Temperature：0°C ~ 70°C
Mounting Type：Surface Mount
Package / Case：8-SMD, Gull Wing
Supplier Device Package：8-DIP Gull Wing

Transistor, Photovoltaic Output Optoisolators datasheet and documents for HCPL-270L-500E

HCPL-270L-500E

Transistor, Photovoltaic Output Optoisolators Overview

The HCPL-270L-500E is a high-gain digital optocoupler manufactured by Broadcom Limited. It features a single channel with a data rate of 100 kb/s and an isolation voltage of 3750 Vrms. The device utilizes a photodarlington output type, supporting a maximum forward current of 20 mA and an output current of 60 mA. It operates within a temperature range of 0°C to 85°C and is housed in an 8-pin PDIP Gull Wing package.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Integrates a light emitting diode with an integrated high gain photodetector for signal transmission
Provides electrical isolation between input and output circuits
Designed for high noise immunity in digital signal applications

Transistor, Photovoltaic Output Optoisolators Applications

Digital signal isolation in industrial control systems
Signal coupling in microprocessor-based systems
Isolation interfaces in measurement equipment

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix '500E' against the official Broadcom datasheet to confirm packaging and RoHS compliance status. Ensure the procurement source provides valid traceability documentation. Confirm that the component matches the 8-pin PDIP Gull Wing package specification before integration into production workflows.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when a single-channel isolator with moderate speed and high current transfer ratio is required. The photodarlington output offers higher gain compared to standard transistor outputs. Consider the 100 kb/s data rate limit for application timing requirements. Verify thermal management needs based on the specified power dissipation limits.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the HCPL-270L/070L/273L/073L series from Broadcom Inc. These couplers are designed as high-gain series devices using an LED and integrated photodetector. The series focuses on providing reliable isolation for digital communication lines with enhanced sensitivity.