HCPL-3101-000E

$1.33

Description：OPTOISO 5KV 1CH GATE DVR 8DIP
Series：-
Mfr：Broadcom Limited
Package：Tube

SKU:3e46411210f9 Category: Isolators - Gate Drivers Brand: Broadcom Limited

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

HCPL-3101-000E is listed in the Isolators - Gate Drivers range at ChipApex. The manufacturer field lists Broadcom Limited. Its product description is OPTOISO 5KV 1CH GATE DVR 8DIP. Review the specifications below when checking this part for your BOM.

Isolators - Gate Drivers specifications for HCPL-3101-000E

Description：OPTOISO 5KV 1CH GATE DVR 8DIP
Series：-
Mfr：Broadcom Limited
Package：Tube
Technology：Optical Coupling
Number of Channels：1
Voltage - Isolation：5000Vrms
Propagation Delay tpLH / tpHL (Max)：500ns, 500ns
Pulse Width Distortion (Max)：-
Rise / Fall Time (Typ)：200ns, 200ns
Current - Output High, Low：-
Current - Peak Output：600mA
Voltage - Forward (Vf) (Typ)：1.6V
Voltage - Output Supply：15V ~ 30V
Grade：-
Qualification：-
Operating Temperature：-40°C ~ 85°C
Mounting Type：Through Hole
Package / Case：8-DIP (0.300", 7.62mm)
Supplier Device Package：8-DIP
Common Mode Transient Immunity (Min)：15kV/µs
Approval Agency：UR
Current - DC Forward (If) (Max)：20 mA

Isolators - Gate Drivers datasheet and documents for HCPL-3101-000E

HCPL-3101-000E

Isolators - Gate Drivers Overview

The Broadcom HCPL-3101-000E is a single-channel high-speed optocoupler featuring an integrated gate driver output. It provides electrical isolation of 5000Vrms between input and output circuits. The device operates with a minimum operating temperature of -40°C and supports a maximum forward voltage of 1.8V on the input side. It delivers an output current capability of 600mA, suitable for driving power switches. The component utilizes an 8-pin DIP package configuration.

Isolators - Gate Drivers Feature Summary

Integrates a dedicated gate driver stage within the optocoupler structure
Provides high-voltage isolation barrier for circuit protection
Designed for high-speed signal transmission in power conversion systems

Isolators - Gate Drivers Applications

Industrial motor control drives
Power supply gate drive circuits
Inverter applications

Isolators - Gate Drivers Procurement Notes

Verify the specific ordering suffix matches the required package type and certification standards. Confirm that the 5000Vrms isolation rating aligns with safety regulations for the target application environment. Ensure the 600mA output current capacity meets the load requirements of the controlled power devices without exceeding thermal limits.

Isolators - Gate Drivers Selection Notes

Select this component when a combined optocoupler and gate driver solution is required to reduce board space. Consider the 8-pin DIP package for through-hole assembly needs. Evaluate the 5000Vrms isolation level against system voltage stresses. Compare propagation delays if precise timing synchronization is critical for the switching frequency.

Isolators - Gate Drivers Part Context

This part belongs to the HCPL series of optocouplers manufactured by Broadcom Limited. It differs from standard logic output optocouplers by including internal amplification stages to drive power transistors directly. The series focuses on industrial and power electronics applications requiring robust isolation and high current drive capabilities.