ILD250-X009T

Description：OPTOISOLTR 5.3KV 2CH TRANS 8-SMD
Series：-
Mfr：Vishay Semiconductor Opto Division
Package：Tape & Reel (TR)

SKU:b445c933ca96 Category: Transistor, Photovoltaic Output Optoisolators Brand: Vishay Semiconductor Opto Division

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

ILD250-X009T is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Vishay Semiconductor Opto Division. Its product description is OPTOISOLTR 5.3KV 2CH TRANS 8-SMD. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for ILD250-X009T

Description：OPTOISOLTR 5.3KV 2CH TRANS 8-SMD
Series：-
Mfr：Vishay Semiconductor Opto Division
Package：Tape & Reel (TR)
Number of Channels：2
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：50% @ 10mA
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：-
Rise / Fall Time (Typ)：-
Input Type：AC, DC
Output Type：Transistor
Voltage - Output (Max)：30V
Current - Output / Channel：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：400mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：8-SMD, Gull Wing
Supplier Device Package：8-SMD

Transistor, Photovoltaic Output Optoisolators datasheet and documents for ILD250-X009T

ILD250-X009T

Transistor, Photovoltaic Output Optoisolators Overview

The ILD250-X009T is a dual-channel optoisolator manufactured by Vishay Semiconductor Opto Division, featuring phototransistor outputs. It provides electrical isolation with a rated voltage of 5300Vrms across two independent channels housed in an 8-SMD package. The device supports both AC and DC input types, with a typical forward voltage of 1.2V and a maximum DC forward current of 60 mA. It offers a minimum current transfer ratio of 50% at 10mA and operates within a temperature range of -55°C to 100°C.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Dual-channel configuration for simultaneous signal isolation
High insulation voltage rating for safety compliance
Phototransistor output architecture
Surface-mount packaging for automated assembly

Transistor, Photovoltaic Output Optoisolators Applications

Digital logic transmission and conversion
Power supply control and switching circuits
Electrical isolation between circuit stages
Impedance transformation in isolated systems

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix against official Vishay documentation to confirm pinout and electrical characteristics match design requirements. Ensure the component meets RoHS3 standards if environmental compliance is mandatory. Confirm that the 8-SMD footprint aligns with PCB layout constraints before finalizing procurement orders.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when dual-channel isolation is required within a compact surface-mount form factor. Consider the 5300Vrms isolation rating for high-voltage safety applications. Evaluate the 50% minimum CTR to ensure adequate signal coupling efficiency for the intended load conditions and operating temperature range.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the ILD series of Vishay optocouplers, designed for general-purpose isolation tasks. It shares architectural similarities with other dual-channel variants but distinguishes itself through specific packaging and electrical ratings suitable for modern SMD manufacturing processes.