ISL28230FUZ-T7

$2.78

Description：IC OPAMP GP 2 CIRCUIT 8MSOP
Series：-
Mfr：Renesas Electronics Corporation
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:6b96c9024dea Category: Instrumentation, Op Amps, Buffer Amps Brand: Renesas Electronics Corporation

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

ISL28230FUZ-T7 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Renesas Electronics Corporation. Its product description is IC OPAMP GP 2 CIRCUIT 8MSOP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for ISL28230FUZ-T7

Description：IC OPAMP GP 2 CIRCUIT 8MSOP
Series：-
Mfr：Renesas Electronics Corporation
Package：Tape & Reel (TR),Cut Tape (CT)
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：0.2V/µs
Gain Bandwidth Product：400 kHz
Current - Input Bias：250 pA
Voltage - Input Offset：5 µV
Current - Supply：20µA (x2 Channels)
Current - Output / Channel：15 mA
Voltage - Supply Span (Min)：1.8 V
Voltage - Supply Span (Max)：5.5 V
Operating Temperature：-40°C ~ 125°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Supplier Device Package：8-MSOP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for ISL28230FUZ-T7

ISL28230FUZ-T7

Instrumentation, Op Amps, Buffer Amps Overview

The ISL28230FUZ-T7 is a dual micro-power, rail-to-rail input/output zero-drift operational amplifier manufactured by Renesas Electronics. It features a gain-bandwidth product of 400 kHz and a slew rate of 200 mV/us. The device operates within a supply voltage range of 1.8 V to 5.5 V with a typical quiescent current of 20 uA per channel. Key electrical specifications include an input offset voltage of 40 uV, input bias current of 250 pA, common-mode rejection ratio of 105 dB, and input voltage noise density of 65 nV/sqrt Hz. It is housed in an MSOP-8 package and supports an operating temperature range from -40 C to +125 C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Zero-drift architecture for high precision
Rail-to-rail input and output capability
Micro-power consumption design

Instrumentation, Op Amps, Buffer Amps Applications

Precision sensor signal conditioning
Battery-powered instrumentation systems
Medical diagnostic equipment

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix T7 indicates reel packaging when ordering. Confirm the FUZ designation corresponds to the industrial temperature grade (-40 C to +125 C) and MSOP-8 package type required for your design. Check manufacturer notices regarding end-of-life status or lifecycle changes before finalizing procurement plans.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component for applications requiring low power operation alongside high DC accuracy. The zero-drift technology minimizes offset voltage drift over temperature, making it suitable for high-resolution measurements. Ensure the 400 kHz bandwidth meets the signal frequency requirements and that the MSOP-8 footprint fits the PCB layout constraints.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the ISL28x30 series of dual operational amplifiers. It is designed as a successor to previous Intersil precision amplifier lines, now under Renesas Electronics. The series focuses on combining ultra-low power consumption with high precision characteristics for portable and battery-operated electronic devices.