LMH6739MQ

$2.68

Description：VIDEO AMPLIFIER, 1 CHANNEL(S), 3
Series：-
Mfr：National Semiconductor
Package：Bulk

SKU:e6d6535c35bb Category: Video Amps and Modules Brand: National Semiconductor

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LMH6739MQ is listed in the Video Amps And Modules range at ChipApex. The manufacturer field lists National Semiconductor. Its product description is VIDEO AMPLIFIER, 1 CHANNEL(S), 3. Review the specifications below when checking this part for your BOM.

Video Amps And Modules specifications for LMH6739MQ

Description：VIDEO AMPLIFIER, 1 CHANNEL(S), 3
Series：-
Mfr：National Semiconductor
Package：Bulk
Applications：Buffer
Output Type：-
Number of Circuits：3
Slew Rate：3300V/µs
Current - Supply：32 mA
Current - Output / Channel：90 mA
Voltage - Supply, Single/Dual (±)：8V ~ 12V, ±4V ~ 6V
Mounting Type：Surface Mount
Package / Case：16-SSOP (0.154", 3.90mm Width)
Supplier Device Package：16-SSOP
-3db Bandwidth：750 MHz
Grade：-
Qualification：-

Video Amps And Modules datasheet and documents for LMH6739MQ

LMH6739MQ

Video Amps And Modules Overview

The LMH6739MQ is a triple video amplifier manufactured by Texas Instruments, formerly National Semiconductor. It operates on a single supply voltage ranging from 8 V to 12 V with a typical operating current of 10.6 mA. The device features a slew rate of 3.3 kV/us and an input offset voltage of 2.5 mV. Common-mode rejection ratio (CMRR) ranges from 46 dB to 50 dB. It is housed in a 16-pin SSOP package and functions within a temperature range of -40°C to +85°C.

Video Amps And Modules Feature Summary

Triple channel architecture for multi-signal processing
Very wideband performance with low distortion characteristics
High slew rate capability for fast signal transitions

Video Amps And Modules Applications

Video signal amplification
Professional broadcast equipment
Test and measurement instrumentation

Video Amps And Modules Procurement Notes

Verify the manufacturer designation as Texas Instruments, which acquired National Semiconductor. Confirm the specific suffix 'MQ' corresponds to the SSOP-16 package and commercial/industrial temperature range. Ensure the NOPB variant is considered if lead-free compliance is required, as datasheets often list LMH6739MQ/NOPB as the primary ordering part number.

Video Amps And Modules Selection Notes

Select this component when high-speed triple-channel amplification is required for video applications. Compare against single-channel alternatives like the LMH6639 if only one channel is needed. Verify that the 8 V minimum supply voltage aligns with the system power rails. Check the CMRR requirements against the 46 dB to 50 dB specification to ensure adequate noise rejection.

Video Amps And Modules Part Context

This component belongs to the LMH6739 series of very wideband low distortion triple video amplifiers. It is designed for demanding analog video processing tasks where signal integrity and speed are critical. The device integrates three independent amplifiers into a single compact package, reducing board space compared to discrete solutions.