LNA-20-01000200-06-10P

Overview

The LNA-20-01000200-06-10P is a low-noise amplifier module manufactured by L3 Narda-MITEQ, designed for VSAT applications. It operates within a frequency range of 1 GHz to 2 GHz. The device provides a gain of 20 dB with a noise figure of 0.6 dB. It achieves a 1 dB compression point (P1dB) of 10 dBm. Power requirements include a supply voltage of 15 V and a current draw of approximately 225 mA. The component is housed in a module package equipped with SMA connectors.

Feature Summary

• Optimized for Very Small Aperture Terminal (VSAT) communication systems
• Ultra-low noise figure performance for sensitive signal reception
• Integrated module design with standard SMA interfaces

Applications

• VSAT ground station receivers
• Satellite communication uplink/downlink chains
• Low-noise front-end amplification in RF systems

Procurement Notes

Verify the complete part number including suffixes against official L3 Narda-MITEQ documentation to ensure correct pinout and connector configuration. Confirm that the 15V power supply specifications match your system design. Check for any specific environmental or qualification requirements relevant to your deployment environment before finalizing procurement.

Selection Notes

Select this component when a low noise figure of 0.6 dB is critical for system sensitivity in the 1-2 GHz band. Ensure the available 15V DC supply can support the required current consumption. Compare the 10 dBm P1dB output capability against your downstream component input limits to prevent saturation or damage in the signal chain.

Part Context

This model belongs to the LNA-20 series from L3 Narda-MITEQ, which offers various configurations for different frequency bands and performance metrics. The series is widely used in satellite communications where reliable low-noise amplification is essential. Other variants in the series may differ in frequency range, gain, or physical packaging while maintaining similar functional principles.

Replacement Considerations

Direct replacements must match the 1-2 GHz frequency range, 0.6 dB noise figure, and 20 dB gain. Verify mechanical compatibility with SMA connectors and identical 15V/225mA power requirements. Cross-reference with other L3 Narda-MITEQ models like LNA-20-02000400-25-20P only if frequency and performance specs align.