LT6010ACS8#PBF

Instrumentation, Op Amps, Buffer Amps Overview

The LT6010ACS8#PBF is a single-channel precision operational amplifier manufactured by Analog Devices Inc. It features a supply current of 135µA, an input offset voltage of 10µV typical and 35mV maximum, and an input bias current of 20pA typical with 110pA maximum. The device offers a gain-bandwidth product of 330kHz, a slew rate of 90mV/µs, and an input noise voltage density of 14nV/√Hz at 1kHz. It operates on supply voltages from 2.7V to 36V (total up to 40V) and includes a shutdown feature reducing current to 12mA. The output swings rail-to-rail within approximately 40mV of the rails. It is housed in an 8-lead SOIC package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Combines low noise and high precision input performance with low power consumption and rail-to-rail output swing
• Input offset voltage trimmed to less than 35mV with low drift and excellent long-term stability
• Power saving shutdown feature reduces supply current significantly when activated
• Output voltage swings to within millivolts of either supply rail for low voltage single supply operation

Instrumentation, Op Amps, Buffer Amps Applications

• Thermocouple Amplifiers
• Precision Photo Diode Amplifiers
• Instrumentation Amplifiers
• Battery-Powered Precision Systems

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific grade suffix 'A' corresponds to the required offset voltage and drift specifications for your application. Confirm the '#PBF' suffix indicates lead-free RoHS compliance as per manufacturer standards. Ensure the SOIC-8 package dimensions match your PCB footprint requirements. Check for any recent product change notices regarding pinout or electrical characteristics before finalizing design.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when low supply current is critical alongside high precision requirements. The rail-to-rail output allows for maximum dynamic range in single-supply systems. Consider the shutdown capability if power conservation during idle periods is necessary. Verify that the input common mode voltage range stays within specified limits relative to the supply rails to maintain gain.

Instrumentation, Op Amps, Buffer Amps Part Context

The LT6010 belongs to a family of precision op amps including dual (LT6011) and quad (LT6012) variants. It shares similar electrical characteristics but differs in channel count and package options. The 'S8' designation specifically refers to the 8-lead plastic small outline package. Other grades like 'C' and 'I' offer different temperature ranges and offset voltage specifications compared to the 'A' grade.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

LT6011IS8#PBF

Instrumentation, Op Amps, Buffer Amps FAQ

Does the LT6010 exhibit phase reversal when the input common mode voltage exceeds its specified range?

No, exceeding the input common mode range will cause the gain to drop to zero, but no phase reversal will occur.

Can the shutdown feature be used for multiplexing applications?

No, the output of the LT6010 op amp is not isolated from the inputs while in shutdown mode, so it cannot be used for multiplexing.