LT6600IS8-15#PBF

$10.41

Description：IC OPAMP DIFF 1 CIRCUIT 8SO
Series：-
Mfr：Analog Devices Inc.
Package：Tube

SKU:4a68a05c0c41 Category: Instrumentation, Op Amps, Buffer Amps Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LT6600IS8-15#PBF is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC OPAMP DIFF 1 CIRCUIT 8SO. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for LT6600IS8-15#PBF

Description：IC OPAMP DIFF 1 CIRCUIT 8SO
Series：-
Mfr：Analog Devices Inc.
Package：Tube
Amplifier Type：Differential
Number of Circuits：1
Output Type：Differential
Slew Rate：-
Gain Bandwidth Product：-
Current - Input Bias：35 µA
Voltage - Input Offset：10 mV
Current - Supply：38mA
Current - Output / Channel：-
Voltage - Supply Span (Min)：3 V
Voltage - Supply Span (Max)：11 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SO
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for LT6600IS8-15#PBF

LT6600IS8-15#PBF

Instrumentation, Op Amps, Buffer Amps Overview

The LT6600IS8-15#PBF is a fully differential amplifier integrated with a fourth-order 15MHz lowpass filter. It operates on supply voltages ranging from 3V to 11V, drawing approximately 46mA at 5V. The device features a common mode rejection ratio of 64dB and an input bias current of -35µA. It provides a signal-to-noise ratio of 76dB with a 3V supply and 2VP-P output. The unit is housed in an SO-8 package and functions within a temperature range of -40°C to 85°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Integrates a fully differential amplifier with a fourth-order lowpass filter for compact signal processing
Provides programmable differential gain using only two external resistors
Includes adjustable output common mode voltage capability via the VOCM pin
Supports single or dual power supplies including 3V, 5V, and ±5V configurations

Instrumentation, Op Amps, Buffer Amps Applications

High-speed ADC antialiasing in networking applications
DAC smoothing in cellular base station systems
High-speed test and measurement equipment
Medical imaging systems

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify that the specific suffix #PBF corresponds to lead-free finish requirements for your assembly process. Confirm the IS8 designation matches industrial temperature specifications (-40°C to 85°C) rather than commercial grades. Ensure the SO-8 package dimensions align with your PCB footprint design rules before finalizing procurement orders.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when a combined filtering and amplification stage is required to minimize board space. It serves as a drop-in replacement for standalone differential amplifiers where integrated frequency response shaping is needed. Consider the fixed 15MHz cutoff frequency against system bandwidth requirements to ensure adequate attenuation of out-of-band signals without excessive passband ripple.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the LT6600 series of very low noise differential amplifiers with integrated filters. Variants such as the LT6600CS8-15 share identical electrical characteristics but differ in temperature grading. The IS8 suffix specifically denotes the industrial temperature range version packaged in an 8-lead plastic SOIC.