LTC1645IS8#PBF

$10.57

Description：IC HOT SWAP CTRLR GP 8SOIC
Series：-
Mfr：Analog Devices Inc.
Package：Tube

SKU:c9e6a9323f3a Category: Hot Swap Controllers Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LTC1645IS8#PBF is listed in the Hot Swap Controllers range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC HOT SWAP CTRLR GP 8SOIC. Review the specifications below when checking this part for your BOM.

Hot Swap Controllers specifications for LTC1645IS8#PBF

Description：IC HOT SWAP CTRLR GP 8SOIC
Series：-
Mfr：Analog Devices Inc.
Package：Tube
Type：Hot Swap Controller, Sequencer
Number of Channels：2
Internal Switch(s)：No
Applications：General Purpose
Features：Latched Fault, UVLO
Programmable Features：Circuit Breaker, Slew Rate
Voltage - Supply：1.2V ~ 12V
Current - Output (Max)：-
Operating Temperature：-40°C ~ 85°C
Current - Supply：1.1 mA
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SO
Grade：-
Qualification：-

Hot Swap Controllers datasheet and documents for LTC1645IS8#PBF

LTC1645IS8#PBF

Hot Swap Controllers Overview

The LTC1645IS8#PBF is a dual-channel hot swap controller designed for positive low-voltage applications. It operates with an external N-channel MOSFET and supports supply voltages from 1.2V to 12V. The device features a typical circuit breaker threshold voltage of 50mV and requires an external sense resistor for current limiting. It is housed in an 8-pin SOIC package, suitable for surface-mount mounting, and functions within a commercial temperature range of 0°C to 70°C.

Hot Swap Controllers Feature Summary

Dual-channel architecture enables independent control of two power rails
Integrated sequence generator manages power-up timing
External FET design allows optimization for specific current requirements

Hot Swap Controllers Applications

Advanced Mezzanine Card (AMC) power management
Hot swap insertion and removal protection
Power sequencing in multi-rail systems

Hot Swap Controllers Procurement Notes

Verify the specific suffix against official Analog Devices documentation to confirm package type and temperature grade. Ensure the component meets RoHS compliance requirements for your target market. Confirm availability status as supply conditions may vary by region and distributor.

Hot Swap Controllers Selection Notes

Select this component when dual-channel hot swap functionality is required for low-voltage systems. Verify that the external MOSFET selection aligns with the 50mV threshold sensitivity. Ensure the application voltage remains within the 1.2V to 12V operating range for reliable performance.

Hot Swap Controllers Part Context

This part belongs to the LTC1645 family of hot swap controllers. It shares functional similarities with other devices in the series but is distinguished by its dual-channel capability and specific package configuration. The IS8 variant denotes the industrial temperature grade and 8-pin SOIC footprint.