LTC6253HMS-7#TRPBF

Description：IC OPAMP GP 2 CIRCUIT 10MSOP
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR)

SKU:09029f863f3b Category: Instrumentation, Op Amps, Buffer Amps Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LTC6253HMS-7#TRPBF is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC OPAMP GP 2 CIRCUIT 10MSOP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for LTC6253HMS-7#TRPBF

Description：IC OPAMP GP 2 CIRCUIT 10MSOP
Series：-
Mfr：Analog Devices Inc.
Package：Tape & Reel (TR)
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：Rail-to-Rail
Slew Rate：500V/µs
Gain Bandwidth Product：2 GHz
Current - Input Bias：1.4 µA
Voltage - Input Offset：50 µV
Current - Supply：4.25mA (x2 Channels)
Current - Output / Channel：100 mA
Voltage - Supply Span (Min)：2.5 V
Voltage - Supply Span (Max)：5.25 V
Operating Temperature：-40°C ~ 125°C
Mounting Type：Surface Mount
Package / Case：10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Supplier Device Package：10-MSOP
-3db Bandwidth：400 MHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for LTC6253HMS-7#TRPBF

LTC6253HMS-7#TRPBF

Instrumentation, Op Amps, Buffer Amps Overview

The LTC6253HMS-7#TRPBF is a dual high-speed, low-power operational amplifier featuring rail-to-rail input and output capabilities. It operates on a supply voltage range of 2.5V to 5.25V with a typical quiescent current of 3.5mA per amplifier. The device provides a gain-bandwidth product of 2GHz and a slew rate of 500V/µs. It includes independent shutdown pins that reduce current consumption to approximately 42µA when disabled.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Dual channel architecture with independent shutdown control for each amplifier
Rail-to-rail input and output signal swing capability
High bandwidth and fast slew rate suitable for demanding signal processing
Low power consumption optimized for lower supply voltage systems

Instrumentation, Op Amps, Buffer Amps Applications

Driving A/D converters
Low voltage, high frequency signal processing
Rail-to-rail buffer amplifiers
Active filters
Battery powered equipment

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'HMS-7' indicates the extended temperature grade (-40°C to 125°C) and MSOP-10 package. Confirm the '#TRPBF' designation corresponds to tape and reel packaging. Ensure compatibility with existing PCB footprints for the 10-lead plastic MSOP format before finalizing procurement.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when a gain stability of 7 or higher is acceptable in the circuit design. Consider the trade-off between the 3.5mA quiescent current and the 2GHz bandwidth. Verify that the required output drive current does not exceed the specified limits under the intended load conditions and thermal constraints.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the LTC6253 family of dual operational amplifiers. The 'H' suffix denotes the industrial temperature range extension up to 125°C compared to standard grades. The 'MS' indicates the 10-lead MSOP package type, while the '-7' specifies the fixed noise gain stability requirement.