MAX4444ESE+T

$8.78

Description：IC AMP RECEIVER 16SOIC
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:2324d439658f Category: Video Amps and Modules Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4444ESE+T is listed in the Video Amps And Modules range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC AMP RECEIVER 16SOIC. Review the specifications below when checking this part for your BOM.

Video Amps And Modules specifications for MAX4444ESE+T

Description：IC AMP RECEIVER 16SOIC
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tape & Reel (TR),Cut Tape (CT)
Applications：Receiver
Output Type：-
Number of Circuits：1
Slew Rate：5000V/µs
Current - Supply：41 mA
Current - Output / Channel：120 mA
Voltage - Supply, Single/Dual (±)：±4.5V ~ 5.5V
Mounting Type：Surface Mount
Package / Case：16-SOIC (0.154", 3.90mm Width)
Supplier Device Package：16-SOIC
-3db Bandwidth：550 MHz
Grade：-
Qualification：-

Video Amps And Modules datasheet and documents for MAX4444ESE+T

MAX4444ESE+T

Video Amps And Modules Overview

The MAX4444ESE+T is a differential-to-single-ended line receiver in a 16-pin Narrow SO package. It operates from ±4.5V to ±5.5V supplies with a quiescent current of 3.5mA to 5.5mA and an output drive capability of 120mA. The device features a small-signal bandwidth of 550MHz, a large-signal bandwidth of 650MHz, and a slew rate of up to 5000V/µs. It provides a fixed internal gain of +2V/V, input offset voltage of 15mV typical, and low noise density of 25nV/√Hz at 100kHz.

Video Amps And Modules Feature Summary

Utilizes a three op amp instrumentation amplifier architecture for symmetrical differential inputs and single-ended output.
Achieves high-speed performance through current-feedback techniques, supporting video and RF signal processing.
Includes a low-power enable mode that reduces supply current consumption when the EN pin is driven low.

Video Amps And Modules Applications

Differential-to-Single-Ended Conversion
Twisted-Pair to Coaxial Converter
High-Speed Instrumentation Amplifier
Data Acquisition

Video Amps And Modules Procurement Notes

Verify the specific suffix '+T' indicates reel packaging against official documentation. Confirm the 'E' designation corresponds to the industrial temperature range (-40°C to +85°C). Ensure the component is sourced as lead-free (Pb-free) per RoHS compliance standards specified by Analog Devices / Maxim Integrated.

Video Amps And Modules Selection Notes

Select this part for applications requiring a fixed +2V/V gain without external feedback components. Consider the MAX4445 if variable gain settings greater than +2V/V are required via an external resistor. Evaluate the 120mA output drive capability against load requirements to ensure direct coupling to data acquisition systems or coaxial cables.

Video Amps And Modules Part Context

This component belongs to the MAX4444/MAX4445 family of ultra-high-speed, low-distortion differential line receivers. Manufactured by Analog Devices / Maxim Integrated, these devices are designed for demanding video and RF signal-processing environments where high bandwidth and minimal distortion are critical.

Video Amps And Modules Replacement Considerations

The MAX4445 serves as the adjustable-gain variant within the same family. Verify compatibility regarding gain configuration needs before substitution.