MC10H135M

Flip Flops Overview

The MC10H135M is a dual JK-type positive-edge-triggered flip-flop from the onsemi 10H ECL series. It operates with a supply voltage range of -4.9V to -5.46V and supports clock frequencies up to 250 MHz. The device features set and reset functions, complementary outputs, and a static current consumption of 68 mA. It is housed in a 20-PLCC surface-mount package and operates within a temperature range of 0°C to 75°C.

Flip Flops Feature Summary

• Dual JK-type flip-flops with positive-edge triggering for high-speed data synchronization
• Integrated set and reset control functions for direct state management
• Complementary output configuration supporting differential signaling requirements

Flip Flops Applications

• High-speed serial communication interface logic
• Data acquisition system timing circuits
• Test and measurement equipment clock distribution

Flip Flops Procurement Notes

Verify component authenticity through authorized distributors or certified secondary market suppliers due to discontinued status. Confirm package integrity and pin compatibility during inspection. Review manufacturer documentation for any specific handling precautions related to the PLCC form factor and ECL power requirements.

Flip Flops Selection Notes

Select this component when designing systems requiring dual JK flip-flops with set/reset capabilities in an ECL environment. Ensure the design accommodates the negative supply voltage requirement and 68 mA static current draw. Verify that the 20-PLCC package fits the PCB layout constraints and thermal management strategy.

Flip Flops Part Context

Part of the 10H family of ECL logic devices designed for high-speed digital applications. This series provides robust performance in demanding environments where speed and noise immunity are critical. The MC10H135M specifically addresses needs for complex sequential logic operations at elevated clock rates.

Flip Flops Replacement Considerations

Check for MC10H135FN as a potential alternative with identical electrical characteristics but a different LCC(J-leaded) package. Verify pinout compatibility and mechanical fit before substitution.