MC10H176FN

Flip Flops Overview

The MC10H176FN is a Hexadecimal D-Type Master-Slave Flip-Flop belonging to the onsemi 10H ECL logic series. It integrates six independent flip-flops within a single package, designed for high-speed digital applications requiring rapid data processing. The device operates with a negative power supply ranging from -4.94 V to -5.46 V and features a propagation delay of 2.2 ns. It utilizes a 16-pin SOIC surface-mount package and supports a non-inverting output configuration. The component is rated for operation between 0°C and +75°C, ensuring reliability in standard industrial environments.

Flip Flops Feature Summary

• Integrates six independent D-type master-slave flip-flops for parallel data handling
• Optimized for high-speed signal processing with low propagation delay characteristics
• Supports standard ECL voltage levels for compatibility with existing high-speed logic systems

Flip Flops Applications

• High-speed data acquisition systems
• Parallel-to-serial data conversion circuits
• Digital signal processing hardware interfaces

Flip Flops Procurement Notes

Verify component authenticity through authorized distributors or direct manufacturer channels due to end-of-life status. Confirm RoHS compliance requirements against specific project standards, as historical production may vary. Request official datasheets and PCN documentation to ensure technical specifications match current design needs before finalizing procurement decisions.

Flip Flops Selection Notes

Evaluate the MC10H176FN against system timing requirements, specifically the 2.2 ns propagation delay and 250 MHz clock frequency limits. Ensure the design accommodates the specified negative power supply range and thermal operating conditions. Consider the SOIC-16 package constraints for PCB layout and verify that the hexadecimal configuration meets the necessary bit-width requirements for the target application architecture.

Flip Flops Part Context

This component belongs to the MC10H176 family of hexadecimal D-type flip-flops manufactured by onsemi. The 'FN' suffix typically denotes a specific package variant, such as PLCC, differing from the 'M' suffix which indicates SOIC packaging. All variants share identical internal logic functionality and electrical performance parameters defined by the 10H ECL series specifications.

Flip Flops Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation. Due to the discontinued status, alternative solutions require manual evaluation of compatible ECL hex flip-flops from other manufacturers or newer generations within the same product line.