MCP6002-E/P

Instrumentation, Op Amps, Buffer Amps Overview

The MCP6002-E/P is a dual-channel operational amplifier manufactured by Microchip Technology in an 8-pin PDIP package. It features a typical gain bandwidth product of 1 MHz and a supply voltage range from 1.8V to 6.0V. The device draws a typical quiescent current of 100 µA per amplifier. Key electrical specifications include a maximum input offset voltage of 4.5 mV, a typical slew rate of 0.6 V/µs, and a common-mode rejection ratio of 60 dB. It supports rail-to-rail input and output swing and operates within an industrial temperature range of -40°C to +85°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Rail-to-rail input and output capability for maximizing dynamic range in single-supply applications
• Low power consumption with a typical quiescent current of 100 µA per amplifier
• High phase margin stability allowing operation with capacitive loads up to 500 pF
• CMOS construction providing high input impedance and low input bias current

Instrumentation, Op Amps, Buffer Amps Applications

• Battery-powered systems requiring extended operational life
• Portable equipment and handheld devices
• Photodiode amplifiers utilizing the high input impedance
• Active analog filters such as low-pass configurations
• Automotive electronic control units

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify that the ordering suffix 'P' corresponds specifically to the 8-lead Plastic Dual In-Line Package (PDIP). Confirm the 'E' suffix indicates the Extended Temperature Range variant (-40°C to +125°C) rather than the standard Industrial Range. Ensure the component matches the specific pinout and thermal characteristics defined for the PDIP package type in the official datasheet.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when a dual-channel configuration is required alongside rail-to-rail signal handling capabilities. The 1 MHz bandwidth is suitable for general-purpose signal conditioning but may be insufficient for high-frequency data acquisition. Consider the PDIP package only if through-hole mounting is mandated by the mechanical design constraints of the target application.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the MCP6001/2/4 family of low-power operational amplifiers designed for general-purpose use. The family utilizes Microchip's advanced CMOS process technology. While the MCP6001 offers a single channel and the MCP6004 provides four channels, the MCP6002 serves as the dual-channel solution within this unified architecture, sharing identical core electrical performance metrics across all variants.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

MCP6002-I/P

Instrumentation, Op Amps, Buffer Amps FAQ

Does the MCP6002-E/P exhibit phase reversal when inputs exceed the supply rails?

No, the device is designed to prevent phase reversal even when input voltages exceed the positive or negative supply limits.

What is the maximum capacitive load the MCP6002-E/P can drive directly?

The amplifier maintains a typical phase margin of 45° when driving a capacitive load of up to 500 pF without external isolation components.