MOC8101300W

Description：OPTOISOLTR 5.3KV 1CH TRANS 6-DIP
Series：-
Mfr：onsemi
Package：Tube

SKU:e57c22e7df93 Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOC8101300W is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISOLTR 5.3KV 1CH TRANS 6-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MOC8101300W

Description：OPTOISOLTR 5.3KV 1CH TRANS 6-DIP
Series：-
Mfr：onsemi
Package：Tube
Number of Channels：1
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：50% @ 10mA
Current Transfer Ratio (Max)：80% @ 10mA
Turn On / Turn Off Time (Typ)：2µs, 3µs
Rise / Fall Time (Typ)：1µs, 2µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：30V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.15V
Current - DC Forward (If) (Max)：100 mA
Vce Saturation (Max)：400mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.400", 10.16mm)
Supplier Device Package：6-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MOC8101300W

MOC8101300W

Transistor, Photovoltaic Output Optoisolators Overview

The MOC8101300W is a single-channel transistor output optocoupler from onsemi's MOC series. It features a 6-pin DIP package with an NPN phototransistor output lacking a base terminal. Key electrical parameters include a maximum collector-emitter voltage of 70 V, a peak forward current of 100 mA, and an isolation voltage of 5300 Vrms. The device operates within a temperature range of -55°C to +100°C, with a typical current transfer ratio of 300% at 10 mA input.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Provides high-voltage electrical isolation between input and output circuits
Integrates an infrared emitting diode with an NPN phototransistor detector
Offers robust performance across extended industrial temperature ranges

Transistor, Photovoltaic Output Optoisolators Applications

Industrial control systems requiring signal isolation
Solid-state relay driver circuits
Microcontroller interface isolation for noise immunity

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix '300W' against official datasheets to confirm packaging and tape-and-reel specifications. Ensure compatibility with existing PCB footprints for 6-DIP packages. Confirm that the 5300 Vrms isolation rating meets safety standards for the target application environment. Check for RoHS compliance documentation if required by regional regulations.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when high isolation voltage and moderate speed are required. Compare the 70 V collector-emitter voltage limit against load requirements. Consider the 100 mA forward current capability for LED drive needs. Evaluate the 6-pin DIP form factor against space constraints in the design.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to onsemi's MOC family of transistor-output optocouplers. It shares functional similarities with other MOC variants but differs in pin count and specific electrical ratings. The MOC8101 series is designed for general-purpose isolation tasks where cost-effectiveness and reliability are prioritized over high-speed data transmission capabilities.