MOCD208VM

$0.34

Description：OPTOISO 2.5KV 2CH TRANS 8-SOIC
Series：-
Mfr：onsemi
Package：Box

SKU:378a97486831 Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOCD208VM is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISO 2.5KV 2CH TRANS 8-SOIC. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MOCD208VM

Description：OPTOISO 2.5KV 2CH TRANS 8-SOIC
Series：-
Mfr：onsemi
Package：Box
Number of Channels：2
Voltage - Isolation：2500Vrms
Current Transfer Ratio (Min)：40% @ 10mA
Current Transfer Ratio (Max)：125% @ 10mA
Turn On / Turn Off Time (Typ)：7.5µs, 5.7µs
Rise / Fall Time (Typ)：3.2µs, 4.7µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：70V
Current - Output / Channel：150mA
Voltage - Forward (Vf) (Typ)：1.25V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：400mV
Operating Temperature：-40°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MOCD208VM

MOCD208VM

Transistor, Photovoltaic Output Optoisolators Overview

The MOCD208VM is a dual-channel phototransistor output optocoupler manufactured by onsemi. It features an 8-pin SOIC narrow package and provides 2500 Vrms isolation voltage between input and output circuits. The device utilizes NPN phototransistors for output switching, supporting a maximum collector-emitter voltage of 70 V and a peak forward current of 60 mA. Key electrical parameters include a minimum current transfer ratio of 40% and a maximum of 125%, with typical rise and fall times of 3.2 µs and 4.7 µs respectively. The component is designed for surface-mount installation.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Dual-channel configuration providing independent signal isolation within a single compact package
High insulation voltage capability ensuring reliable separation between primary and secondary circuits
NPN phototransistor output structure enabling robust digital switching applications

Transistor, Photovoltaic Output Optoisolators Applications

Industrial control systems requiring galvanic isolation
Communication equipment interface circuits
Power supply feedback loops

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix designation against official documentation to confirm exact performance characteristics and compliance status. Confirm availability as this part number may be subject to discontinuation or lifecycle changes. Ensure compatibility with existing PCB footprint and thermal management requirements during integration planning.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Consider the current transfer ratio range when designing drive circuits to ensure sufficient output saturation under varying temperature conditions. Evaluate the isolation voltage rating against system safety standards. Compare rise and fall times with signal frequency requirements to determine suitability for high-speed data transmission applications.

Transistor, Photovoltaic Output Optoisolators Part Context

This component belongs to the MOCD series of dual-channel optocouplers from onsemi. It shares the same physical package and basic functional architecture with variants such as MOCD208R2M and MOCD217M, differing primarily in specific electrical parameter tolerances and manufacturing lot specifications. The series targets cost-effective isolation solutions for general-purpose electronic designs.