OPA690IDRG4

$1.90

Description：IC VOLTAGE FEEDBACK 1 CIRC 8SOIC
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR)

SKU:a920b1664ed8 Category: Instrumentation, Op Amps, Buffer Amps Brand: Texas Instruments

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

OPA690IDRG4 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC VOLTAGE FEEDBACK 1 CIRC 8SOIC. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for OPA690IDRG4

Description：IC VOLTAGE FEEDBACK 1 CIRC 8SOIC
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR)
Amplifier Type：Voltage Feedback
Number of Circuits：1
Output Type：-
Slew Rate：1800V/µs
Gain Bandwidth Product：300 MHz
Current - Input Bias：3 µA
Voltage - Input Offset：1 mV
Current - Supply：5.5mA
Current - Output / Channel：190 mA
Voltage - Supply Span (Min)：5 V
Voltage - Supply Span (Max)：12 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC
-3db Bandwidth：500 MHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for OPA690IDRG4

OPA690IDRG4

Instrumentation, Op Amps, Buffer Amps Overview

The OPA690IDRG4 is a wideband voltage feedback operational amplifier manufactured by Texas Instruments. It features a gain-bandwidth product of 300 MHz and a slew rate of 1.8 kV/us. The device operates on a single supply voltage ranging from 5 V to 12 V, or dual supplies of ±2.5 V to ±5 V. It delivers an output current of 190 mA per channel with a quiescent current of 5.5 mA. The input offset voltage is 1 mV, and the input bias current is 10 uA. It is housed in an SOIC-8 package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Wideband voltage feedback architecture providing high-speed signal processing capabilities
High output drive capability supporting demanding load requirements
Flexible single-supply operation optimized for low power consumption
Internal disable control pin for efficient power management

Instrumentation, Op Amps, Buffer Amps Applications

Video line drivers
xDSL line drivers and receivers
ADC buffer stages
Active filters

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix IDRG4 corresponds to the SOIC-8 surface-mount package and tape-and-reel shipping configuration. Confirm that the component meets RoHS compliance standards as indicated in official documentation. Ensure the procurement source provides valid traceability for this Texas Instruments part number before finalizing acquisition.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when designing circuits requiring wide bandwidth and fast transient response within a single-supply environment. The high output current makes it suitable for driving transmission lines or capacitive loads directly. Consider the thermal characteristics of the SOIC-8 package for heat dissipation in dense layouts.

Instrumentation, Op Amps, Buffer Amps Part Context

This device belongs to the OPA690 series of high-speed operational amplifiers. It represents an upgrade path for legacy designs previously utilizing the OPA680. The internal structure combines voltage feedback stability with current-feedback-like speed, offering a balanced solution for broadband applications.