PC3H715NIP

Transistor, Photovoltaic Output Optoisolators Overview

The PC3H715NIP is a single-channel transistor output optocoupler manufactured by Sharp Microelectronics. It features an NPN phototransistor output housed in a 4-pin Mini-Flat SMD package. Key electrical parameters include a maximum collector-emitter voltage of 80 V, a maximum collector current of 2.5 mA, and a forward voltage of 1.4 V at 10 mA input current. The device provides 2500 Vrms isolation voltage and operates within a temperature range of -30°C to +100°C. Typical rise and fall times are 4 µs and 3 µs respectively, with a maximum power dissipation of 170 mW.

Transistor, Photovoltaic Output Optoisolators Feature Summary

• Low input current operation requiring only 0.5 mA for activation
• High noise immunity characterized by a minimum common mode rejection rate of 10 kV/µs
• Compact physical footprint utilizing a Mini-Flat surface-mount package design

Transistor, Photovoltaic Output Optoisolators Applications

• Signal isolation in microprocessor control circuits
• Interface between low-voltage logic and higher voltage loads
• Noise suppression in industrial communication lines

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix and package variant when ordering, as the Mini-Flat form factor may have distinct mechanical dimensions compared to standard SOIC packages. Confirm RoHS compliance status through official manufacturer documentation prior to integration into regulated assemblies. Ensure thermal management aligns with the specified 170 mW power dissipation limit under worst-case operating conditions.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when space constraints necessitate a compact surface-mount solution with high common-mode noise rejection capabilities. The low input current requirement makes it suitable for battery-powered or energy-efficient designs. Verify that the 80 V collector-emitter voltage rating exceeds the maximum load voltage in the target application circuit to ensure reliable long-term operation.

Transistor, Photovoltaic Output Optoisolators Part Context

This device belongs to Sharp's PC3H series of miniature optocouplers designed for high-density PCB layouts. The Mini-Flat package offers reduced board area consumption while maintaining robust electrical isolation standards. It serves as a specialized alternative to larger through-hole or standard SOIC optocouplers in modern consumer and industrial electronics.

Transistor, Photovoltaic Output Optoisolators Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material. Cross-referencing requires independent verification of pinout compatibility, electrical ratings, and package dimensions against potential alternatives.