PC817X9J000F

$0.16

Description：OPTOISOLATOR 5KV 1CH TRANS 4-DIP
Series：-
Mfr：Sharp Microelectronics
Package：Tube

SKU:7e1e78d9a397 Category: Transistor, Photovoltaic Output Optoisolators Brand: Sharp Microelectronics

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

PC817X9J000F is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Sharp Microelectronics. Its product description is OPTOISOLATOR 5KV 1CH TRANS 4-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for PC817X9J000F

Description：OPTOISOLATOR 5KV 1CH TRANS 4-DIP
Series：-
Mfr：Sharp Microelectronics
Package：Tube
Number of Channels：1
Voltage - Isolation：5000Vrms
Current Transfer Ratio (Min)：130% @ 5mA
Current Transfer Ratio (Max)：600% @ 5mA
Turn On / Turn Off Time (Typ)：-
Rise / Fall Time (Typ)：4µs, 3µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：80V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：50 mA
Vce Saturation (Max)：200mV
Operating Temperature：-30°C ~ 100°C
Mounting Type：Through Hole
Package / Case：4-DIP (0.300", 7.62mm)
Supplier Device Package：4-DIP
Grade：-
Qualification：-

Transistor, Photovoltaic Output Optoisolators datasheet and documents for PC817X9J000F

PC817X9J000F

Transistor, Photovoltaic Output Optoisolators Overview

The PC817X9J000F is a single-channel transistor output optocoupler manufactured by Sharp Microelectronics. It features a 4-pin DIP package designed for through-hole mounting. The device provides an isolation voltage of 5000 Vrms between input and output circuits. Key electrical parameters include a maximum collector-emitter voltage of 80V, a maximum DC forward current of 50mA, and a typical forward voltage of 1.4V. The current transfer ratio ranges from 50% to 600%, with typical rise and fall times of 18µs each.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Provides high-voltage electrical isolation between control and load circuits using infrared LED and phototransistor technology.
Features a standard four-lead dual in-line package suitable for through-hole PCB mounting.
Offers linear signal transmission capabilities for general-purpose switching applications.

Transistor, Photovoltaic Output Optoisolators Applications

Signal isolation in industrial control systems
Switching power supply feedback loops
Microcontroller interface circuits

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific CTR binning code indicated by the suffix '9' against design requirements, as performance varies within the specified range. Confirm RoHS compliance status for the specific manufacturing batch. Ensure the DIP-4 package dimensions match the target footprint. Check for end-of-life notices or recommended new designations from Sharp Microelectronics before finalizing procurement plans.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when a cost-effective, general-purpose optocoupler with moderate speed is required. The 80V collector-emitter rating suits low-voltage logic interfacing. Consider the 18µs switching speed limitations for high-frequency applications. Verify that the 5000Vrms isolation rating meets safety standards for the intended circuit environment.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the PC817 series of general-purpose photocouplers. The series is widely used in consumer electronics and industrial equipment for basic signal isolation. The X9 designation typically indicates a specific Current Transfer Ratio (CTR) bin within the broader PC817 family, distinguishing it from other variants like A, B, or C bins.