ChipApex | Global Electronic Components Supplier
SEARCH
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：TRANS PREBIAS NPN 50V 0.1A 3DFN
- Series：-
- Mfr：Nexperia USA Inc.
- Package：Tape & Reel (TR),Cut Tape (CT)
- Resistors Included：R1 and R2
- Transistor Type：NPN - Pre-Biased
- Current - Collector (Ic) (Max)：100 mA
- Voltage - Collector Emitter Breakdown (Max)：50 V
- Resistor - Base (R1)：22 kOhms
- Resistor - Emitter Base (R2)：22 kOhms
- DC Current Gain (hFE) (Min) @ Ic, Vce：60 @ 5mA, 5V
- Vce Saturation (Max) @ Ib, Ic：100mV @ 500µA, 10mA
- Current - Collector Cutoff (Max)：100nA
- Frequency - Transition：230 MHz
- Power - Max：360 mW
- Grade：Automotive
- Qualification：AEC-Q101
- Mounting Type：Surface Mount, Wettable Flank
- Package / Case：3-XDFN Exposed Pad
- Supplier Device Package：DFN1412D-3
Download product information
Overview
The PDTC124EQC-QZ is a 50 V, 100 mA NPN Resistor-Equipped Transistor (RET) from Nexperia. It integrates two bias resistors: R1 and R2 are both 22 kΩ. The device is housed in an ultra-small DFN1412D-3 (SOT8009) leadless SMD plastic package with side-wettable flanks, featuring a low profile of 0.5 mm height. Key electrical parameters include a collector-emitter voltage (VCEO) of 50 V, output current (IO) of 100 mA, and a typical transition frequency (fT) of 230 MHz at IC = 10 mA. It meets AEC-Q101 automotive qualification standards.
Feature Summary
- Integrates built-in bias resistors to simplify circuit design and reduce component count.
- Qualified according to AEC-Q101 for use in demanding automotive applications.
- Features a low package height suitable for Automatic Optical Inspection (AOI).
- Utilizes a leadless surface-mount package with side-wettable flanks for enhanced solder joint visibility.
Applications
- Digital logic applications requiring integrated biasing.
- Controlling inputs on integrated circuits.
- Switching loads in cost-sensitive designs.
Procurement Notes
Verify the specific ordering suffix matches the required variant, as the datasheet lists PDTC124EQC-Q without a Z suffix in the official table. Confirm the package type is DFN1412D-3 (SOT8009) and check for AEC-Q101 compliance documentation if automotive grade is required. Ensure the marking code corresponds to '8M' for this specific resistor value configuration.
Selection Notes
Select this RET when space constraints prevent discrete resistor placement. The 22 kΩ internal resistors set the base drive current; verify that the resulting base current is sufficient for saturation at the intended collector load. Compare against the PDTA124EQC-QZ PNP complement if complementary switching is needed. Ensure the 50 V rating exceeds the maximum circuit voltage.
Part Context
This component belongs to the PDTC143/114/124/144EQC-Q series, which shares the same DFN1412D-3 package and general features but varies in internal resistor values. The PDTC124EQC-QZ specifically uses 22 kΩ resistors for both R1 and R2, distinguishing it from the 4.7 kΩ, 10 kΩ, and 47 kΩ variants in the family.
Replacement Considerations
Publicly confirmed substitutes within the same series include PDTC143EQC-Q, PDTC114EQC-Q, and PDTC144EQC-Q, provided their different resistor values meet the circuit requirements. The PNP equivalent is PDTA124EQC-QZ.
