PP200B060

Overview

The Powerex PP200B060 is a POW-R-PAK™ H-Bridge IGBT assembly rated for 200 Amperes and 600 Volts. It integrates F-series trench gate IGBTs with low conduction and switching losses, mounted on a forced air-cooled heatsink. The unit includes a low inductance laminated bus structure, isolated gate drive power supplies, and a DC-link capacitor bank of 18000 µF. Built-in protection features include overvoltage, undervoltage lockout, overcurrent, overtemperature, and short circuit detection. It supports operation with DC bus voltages up to 400VDC and switching frequencies above 20kHz.

Feature Summary

• Integrated gate drive board with fault monitoring and system status LEDs
• Optically isolated gate drive interfaces with dedicated power supplies
• Low inductance laminated bus structure for high efficiency
• Output current measurement and feedback capabilities

Applications

• Motor control systems
• Power supply units
• Uninterruptible Power Supplies (UPS)
• General power conversion applications

Procurement Notes

Verify the specific revision suffix if present, as datasheets may indicate tentative specifications or revisions. Confirm that the required mating connectors match the recommended 3M part numbers for the 26-pin header interface. Ensure the cooling solution provides at least 1500 LFM airflow to maintain thermal resistance specifications. Validate input voltage ranges for both the unregulated +24V and regulated +15V supplies against your system design.

Selection Notes

Select this assembly for applications requiring an integrated H-bridge solution with built-in intelligence. It is suitable for designs needing high efficiency through low-loss F-series IGBTs. Consider the weight of 21 lb and the requirement for forced air cooling when designing the enclosure. The inclusion of analog feedback signals for current, temperature, and DC link voltage simplifies control loop implementation.

Part Context

This component belongs to the Powerex POW-R-PAK™ series, which are configurable IGBT-based power assemblies. These modules are designed to function as converters, choppers, half bridges, full bridges, or three-phase inverters. The series emphasizes ease of integration by combining power devices with control and protection electronics in a single package.

Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation.