PS9587L2-V-AX

Logic Output Optoisolators Overview

The PS9587L2-V-AX is a high-speed optocoupler from Renesas Electronics, featuring a single channel with an open collector output. It supports data rates up to 10 Mbps and provides 5000 Vrms isolation voltage. The device operates within a temperature range of -40°C to 85°C and utilizes an 8-DIP gull wing package. Key electrical parameters include a typical forward voltage of 1.65 V, maximum forward current of 30 mA, and output current of 25 mA. Propagation delays are typically 75 ns, with rise and fall times of 20 ns and 10 ns respectively. Common mode transient immunity is rated at 15 kV/µs.

Logic Output Optoisolators Feature Summary

• High-speed operation supporting 10 Mbps data transmission rates for efficient signal isolation.
• Robust insulation capability with 5000 Vrms isolation voltage ensuring safety in high-voltage environments.
• Enhanced noise immunity characterized by 15 kV/µs common mode transient rejection.
• Open collector output configuration providing flexibility in interfacing with various logic families.

Logic Output Optoisolators Applications

• Industrial automation systems requiring reliable signal isolation between control units and actuators.
• Power supply circuits where feedback loops need galvanic separation from primary side components.
• Communication interfaces demanding high-speed data transfer across isolated boundaries.

Logic Output Optoisolators Procurement Notes

Verify the specific suffix 'V-AX' against the manufacturer's latest datasheet to confirm pinout compatibility and RoHS status. Ensure the ordering part number matches the required packaging format, as variations may exist between tape-and-reel and tube quantities. Cross-reference the component marking with official Renesas documentation to authenticate the source and prevent counterfeit risks during acquisition.

Logic Output Optoisolators Selection Notes

Select this component when high-speed digital isolation is critical for system performance. The 10 Mbps rate suits applications exceeding standard optocoupler capabilities. Consider the 5000 Vrms rating for safety compliance in mains-connected equipment. The open collector output simplifies interface design but requires external pull-up resistors. Evaluate thermal dissipation requirements given the 40 mW power dissipation limit in the specified package.

Logic Output Optoisolators Part Context

This device belongs to the NEPOC series of high-speed optocouplers manufactured by Renesas Electronics. It is designed for applications requiring fast switching speeds and high reliability. The PS9587 family offers various configurations, with the L2 variant specifically denoting the open collector output type. It serves as a modern replacement for slower legacy isolators in industrial and consumer electronics.

Logic Output Optoisolators Replacement Considerations

Check for direct substitutes like PS9587L1 or PS9587L3 if different output types are needed. Verify pin compatibility before swapping with other high-speed optocouplers from different manufacturers. Ensure that alternative parts meet the same 10 Mbps speed and 5000 Vrms isolation requirements for equivalent performance.

Logic Output Optoisolators FAQ

What is the maximum data rate supported by the PS9587L2-V-AX?

The PS9587L2-V-AX supports a nominal data rate of 10 Mbps.

Does the PS9587L2-V-AX have a built-in pull-up resistor?

No, it features an open collector output which requires an external pull-up resistor for proper operation.

What is the common mode transient immunity (CMTI) of this optocoupler?

The CMTI is specified as 15 kV/µs, providing strong resistance to noise spikes.