PSAN-L1CV-R1/8

Pressure Sensors Transducers Overview

The Autonics PSAN-L1CV-R1/8 is a digital display pressure sensor designed for air and non-corrosive gases. It features an R1/8 rear port interface and operates on a 12-24VDC power supply with a maximum ripple of 10%. The rated pressure range spans from 0 to 1,000kPa, supporting multiple display units including MPa, kPa, kgf/cm², bar, and psi. Control outputs include NPN open collector and optional 1-5VDC voltage output. Current consumption is max 50mA for voltage type and 75mA for current type. The unit has an IP40 rating, weighs approximately 165g gross, and functions within -10 to 50°C.

Pressure Sensors Transducers Feature Summary

• Digital display capability with automatic error correction via external input for fluctuating pressures
• Supports both NPN open collector switching and 1-5VDC analog voltage outputs
• Configurable control output modes including hysteresis and window comparison
• Indoor-rated construction with PC housing and nickel-plated brass pressure interface

Pressure Sensors Transducers Applications

• Industrial pneumatic system monitoring
• Vacuum level detection in manufacturing equipment
• HVAC pressure regulation systems
• Automated machinery requiring precise pressure feedback

Pressure Sensors Transducers Procurement Notes

Verify the specific model suffix matches the required pressure range and output configuration. Confirm that the application environment remains indoors and free from condensation or freezing conditions, as outdoor use may shorten product life or cause electrical shock. Ensure the connected load does not exceed the specified maximum current limits for the selected output type.

Pressure Sensors Transducers Selection Notes

Select this model when a digital readout is required alongside standard industrial control signals. The R1/8 port size dictates compatibility with existing piping interfaces. Choose between NPN and voltage outputs based on the receiving PLC or controller input requirements. Note that only one analog output type can be selected per unit.

Pressure Sensors Transducers Part Context

This component belongs to the Autonics PSAN series of digital pressure sensors. The series is engineered for use with gases, liquids, and oils, offering high precision and reliability. The PSAN-L1CV variant specifically integrates a connector-type cable for simplified installation compared to terminal block models.

Pressure Sensors Transducers Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Users should verify compatibility with existing mounting hardware and signal wiring configurations before attempting any cross-referencing.