PT40-30psig-2-5-8-16-ST8-CC

Pressure Sensors Transducers Overview

The PT40-30psig-2-5-8-16-ST8-CC is a gauge pressure sensor manufactured by NOSHOK, Inc. It features a measurement range of 0 PSI to 30 PSI (0 kPa to 206.84 kPa). The device provides an analog output signal ranging from 0 V to 10 V. It utilizes a male 1/2-inch (12.7 mm) NPT process connection for installation. This component is designed for industrial pressure monitoring applications requiring a standardized voltage output and robust mechanical interface.

Pressure Sensors Transducers Feature Summary

• Provides a linear 0 V to 10 V analog voltage output corresponding to the measured pressure range
• Features a male 1/2-inch NPT threaded process connection for secure system integration
• Designed for gauge pressure measurement within a 0 to 30 PSI operational window

Pressure Sensors Transducers Applications

• Industrial process control systems
• Compressed air monitoring
• Hydraulic and pneumatic equipment testing

Pressure Sensors Transducers Procurement Notes

Verify that the required supply voltage matches the sensor's specifications before procurement. Confirm the 0-10 V output signal aligns with the input requirements of the connected data acquisition or control system. Ensure the 1/2-inch NPT thread size is compatible with existing piping interfaces. Check environmental conditions against the sensor's operating limits to guarantee long-term reliability in the intended application.

Pressure Sensors Transducers Selection Notes

Select this model when a 0-30 PSI gauge pressure range is required with a simple 0-10 V analog interface. The 1/2-inch NPT connection suits standard industrial piping configurations. Consider this part if the application demands a robust mechanical seal and a widely supported voltage output format for easy integration with PLCs or data loggers without complex signal conditioning.

Pressure Sensors Transducers Part Context

This sensor belongs to the PT40 series from NOSHOK, Inc., which focuses on general-purpose pressure measurement solutions. The specific suffixes indicate the pressure range, output type, and physical connection details. This model represents a standard configuration for low-pressure gauge applications in industrial environments where reliable analog signaling is necessary.

Pressure Sensors Transducers Replacement Considerations

When sourcing substitutes, ensure the replacement offers a matching 0-30 PSI gauge range and a 0-10 V output. Verify compatibility with the 1/2-inch NPT process connection. Cross-reference electrical specifications such as supply voltage and accuracy to maintain system performance integrity during component replacement.