SDB201-TP

Bridge Rectifier Overview

The SDB201-TP is a single-phase bridge rectifier manufactured by Micro Commercial Components (MCC). It features a glass passivated chip junction and operates with an average rectified forward current of 2 A at an ambient temperature of 40°C. The device supports a peak repetitive reverse voltage of 50 V and can withstand a non-repetitive peak surge current of 60 A for an 8.3 ms half-sine wave. It utilizes the SDB-1 surface mount package, which measures approximately 10.4 mm in length and 8.51 mm in width. The component is rated for an operating junction temperature range from -55°C to 150°C.

Bridge Rectifier Feature Summary

• Glass passivated chip junction construction
• Halogen-free "Green" device compliant with environmental standards
• Surface mount SDB-1 package design
• Epoxy meets UL 94 V-0 flammability rating

Bridge Rectifier Applications

• General purpose AC to DC conversion circuits
• Power supply input stages
• Bridge rectification in consumer electronics

Bridge Rectifier Procurement Notes

Verify authenticity through authorized MCC distributors or direct purchase to avoid counterfeit components. Confirm the -TP suffix indicates tape and reel packaging containing 1500 pieces per reel. Ensure compliance with RoHS directives and check for specific halogen-free certifications if required by project specifications.

Bridge Rectifier Selection Notes

Select this component when a 2 A continuous current rating and 50 V reverse voltage capability are required in a compact surface mount form factor. Consider the thermal resistance characteristics and derating curves for high ambient temperature environments. Verify that the SDB-1 footprint matches the PCB layout constraints.

Bridge Rectifier Part Context

This part belongs to the SDB201-SDB207 series of single-phase bridge rectifiers from Micro Commercial Components. The series offers varying reverse voltage ratings from 50 V to 1000 V while maintaining a consistent 2 A current capacity and standardized SDB-1 package dimensions across all variants.

Bridge Rectifier Replacement Considerations

Direct substitutes must match the 2 A current rating, 50 V minimum reverse voltage, and SDB-1 package type. Verify electrical parameters such as forward voltage drop and reverse leakage current against the original datasheet requirements before implementation.