SG-8101CG 11.1100M-TBGSA0

Oscillators Overview

The SG-8101CG 11.1100M-TBGSA0 is a CMOS crystal oscillator manufactured by Epson. It operates at a frequency of 11.11 MHz with a stability of ±15 ppm. The device supports supply voltages from 1.8V to 3.3V and features a standby function. Current consumption is typically 3 mA during operation and 1.1 µA in disable mode. It utilizes a 4-SMD, no-lead package measuring 2.50mm x 2.00mm x 0.80mm. The operating temperature range is -40°C to +85°C.

Oscillators Feature Summary

• Supports standby (power down) functionality for reduced power consumption
• CMOS output signal type for standard digital interface compatibility
• Compact surface-mount package design suitable for space-constrained applications

Oscillators Applications

• General clock generation for embedded systems
• Timing reference for consumer electronics
• Industrial control equipment requiring stable clock signals

Oscillators Procurement Notes

Verify the specific frequency suffix matches the required 11.11 MHz specification. Confirm that the TBGSA0 package variant aligns with PCB footprint requirements. Ensure voltage levels are within the 1.8V to 3.3V operational range. Check for any specific environmental certifications if used in regulated industries.

Oscillators Selection Notes

Select this component when a low-power, small-footprint oscillator is needed. The ±15 ppm stability is suitable for general timing applications. Consider the standby current requirement if battery life is critical. Verify that the CMOS output swing meets the input requirements of the connected load circuitry.

Oscillators Part Context

This part belongs to the SG-8101 series of standard oscillators from Epson Timing. The series offers various frequencies and packages. The CG suffix indicates specific performance characteristics within the lineup. This model provides a balance of size, power, and cost for mass-produced electronic devices.

Oscillators Replacement Considerations

Direct replacements must match the 11.11 MHz frequency, 4-SMD package, and CMOS output. Verify equivalent stability and voltage ranges. Cross-reference with other Epson SG-8101 variants or compatible industry-standard oscillators if availability is an issue.