SGR-8002JA-SCC

Overview

The SGR-8002JA-SCC is a programmable crystal oscillator (XO) manufactured by EPSON. It operates within a frequency range of 1 MHz to 125 MHz and utilizes CMOS output signals. The device supports a supply voltage of 3.3V and features a standby function with a maximum current consumption of 50 µA in the disabled state. Normal operation draws up to 28 mA. Frequency stability is rated at ±100 ppm. The component functions across an operating temperature range of -20°C to +70°C. It is housed in a 4-SOJ package with a 5.08 mm pitch, measuring approximately 13.70 mm in length and 6.60 mm in width.

Feature Summary

• Programmable frequency generation capability within the 1 MHz to 125 MHz range
• Integrated standby mode for power conservation during inactive periods
• CMOS logic output interface compatible with standard digital circuits

Applications

• Telecommunications equipment requiring precise clock synchronization
• Data communication systems utilizing standard CMOS interfaces
• Industrial control units operating within specified temperature ranges

Procurement Notes

Verify the specific programming requirements for the desired frequency before procurement, as this model requires custom configuration. Confirm that the 3.3V supply voltage aligns with the target system design. Ensure the 4-SOJ package dimensions fit the designated PCB footprint. Check for RoHS compliance status if environmental regulations apply to the final assembly. Note that availability may vary due to production cycles.

Selection Notes

Select this component when a programmable solution is required for frequencies between 1 MHz and 125 MHz. The ±100 ppm stability suits applications tolerant of moderate drift. The 3.3V supply and CMOS output make it suitable for low-voltage digital logic families. Consider the through-hole SOJ package for manual assembly or specific mechanical constraints. Evaluate the standby current if power efficiency is critical during idle states.

Part Context

This part belongs to the SG-8002 series of programmable oscillators from EPSON. The series offers various package options and voltage levels. The JA suffix typically denotes specific electrical characteristics or pin configurations within the family. The SCC suffix indicates the specific 4-SOJ package type with a 5.08 mm pitch. This series is designed for general-purpose clocking needs in electronic systems.

Replacement Considerations

Direct replacements are limited due to the programmable nature of the component. Other models in the SG-8002 series with different packages or voltages may serve as alternatives if frequency programming can be adjusted. Verify pin compatibility and electrical specifications before substituting with similar programmable oscillators from other manufacturers.