STGIB30M60TS-L

Overview

The STGIB30M60TS-L is a second-generation SLLIMM intelligent power module featuring a 35 A, 600 V three-phase IGBT inverter bridge. It integrates two proprietary control ICs for gate driving and freewheeling diodes within an SDIP2B-26L package. The device utilizes short-circuit rugged trench gate field-stop (TFS) IGBTs with very fast soft recovery diodes. Key electrical parameters include a collector-emitter saturation voltage of 1.55 V at 30 A and 1.65 V at 35 A. It supports logic inputs of 3.3 V or 5 V TTL/CMOS with hysteresis and operates up to 20 kHz in hard-switching circuitries.

Feature Summary

• Integrates short-circuit rugged TFS IGBTs and very fast soft recovery diodes
• Includes smart shutdown function with immediate output turn-off upon fault detection
• Features built-in temperature sensor and 85 kΩ NTC thermistor for thermal monitoring
• Provides under-voltage lockout and open-drain fault output capabilities

Applications

• Three-phase inverters for motor drives
• Washing machines
• Dryers
• Industrial fans
• Pumps

Procurement Notes

Verify the specific ordering code against the manufacturer's current catalog to ensure compatibility with the SDIP2B-26L type L1 package. Confirm that the required isolation rating of 1600 Vrms/min meets the safety standards of the target application. Check for any updated revision history regarding the datasheet to ensure all electrical characteristics align with the design requirements.

Selection Notes

Select this module for applications requiring high-performance AC motor drives operating up to 20 kHz. Ensure the supply voltage remains within the recommended range of 300 V to 400 V. Verify that the control logic interface matches the 3.3 V or 5 V TTL/CMOS input specifications. Consider the thermal resistance values when designing the heat sinking solution for continuous operation.

Part Context

This component belongs to the SLLIMM (small low-loss intelligent molded module) second series from STMicroelectronics. It is designed as a compact, rugged solution for three-phase inverter bridges. The module combines advanced IGBT technology with integrated gate drivers to simplify the design of motor control systems while maintaining high efficiency and reliability.

Replacement Considerations

STGIB30M60S-E

FAQ

How does the smart shutdown function operate?

The device integrates a comparator that triggers an internal MOSFET to force LVGx outputs low immediately upon fault detection, minimizing propagation delay independent of external RC networks.

What are the logic input voltage levels supported?

The module accepts 3.3 V and 5 V TTL/CMOS logic inputs with hysteresis for the HINx and LINx pins.

Is there internal thermal protection?

Yes, it includes a built-in temperature sensor providing a proportional voltage output on the TSO pin and an 85 kΩ NTC thermistor for direct temperature monitoring.