STIPQ3M60T-HZ

Overview

STIPQ3M60T-HZ is a SLLIMM nano 2nd series intelligent power module featuring a 3-phase inverter bridge with six N-channel MDmesh DM2 Power MOSFETs. It supports a 600 V blocking voltage and 3 A continuous current, with a maximum on-resistance of 1.6 Ω. The device integrates three half-bridge HVICs for gate driving, an operational amplifier, and a comparator for fault protection. Operating within a junction temperature range of -40 to 150 °C, it utilizes an N2DIP-26L type Z package.

Feature Summary

• Integrates six N-channel MDmesh DM2 Power MOSFETs with intrinsic fast-recovery diodes and three half-bridge HVICs for gate driving.
• Includes an uncommitted operational amplifier and a comparator for advanced current sensing and fault protection against overtemperature and overcurrent.
• Features optimized pinout for easy board layout and low electromagnetic interference characteristics with optimized switching speed.
• Provides isolation ratings of 1800 Vrms/min and includes an internal NTC thermistor for temperature control.

Applications

• 3-phase induction motor (ACIM) drives
• PMSM / BLDC motor control
• Dishwashers and refrigerator compressors
• Fans and kitchen hoods

Procurement Notes

Verify the specific ordering code STIPQ3M60T-HZ against official STMicroelectronics documentation to ensure correct component identification. Confirm that the N2DIP-26L type Z package matches the design requirements. Check for any recent product change notifications or end-of-life status updates directly from the manufacturer before finalizing procurement plans.

Selection Notes

Select this module for compact AC motor drive applications requiring high efficiency and low EMI. Ensure the design accommodates the 600 V drain-source voltage and 3 A continuous current limits. Verify compatibility with 3.3 V, 5 V, or 15 V CMOS/TTL logic inputs. Consider the thermal resistance of 10 °C/W per MOSFET for adequate heatsinking in built-in motor assemblies.

Part Context

The STIPQ3M60T-HZ belongs to the SLLIMM nano 2nd series, designed for small low-loss intelligent molded modules. This series targets appliances and low-power industrial applications where assembly space is limited. It combines optimized silicon chips with integrated control ICs to provide a rugged, high-performance solution for motor drives.

Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation.

FAQ

What is the function of the T/SD/OD pin?

The T/SD/OD pin serves as the NTC thermistor terminal, shutdown logic input (active low), and open-drain output for the comparator signal.

How does the device handle overcurrent protection?

It uses an internal comparator connected to the CIN pin for fault detection. In case of a fault, it disables the U outputs directly, while the shutdown of V and W drivers depends on external RC circuitry.

What logic levels are supported by the HIN and LIN inputs?

The device supports 3.3 V, 5 V, and 15 V CMOS/TTL input comparators with hysteresis and pull-down/pull-up resistors.