TE0720-03-61Q33MA

Microcontrollers, Microprocessor, FPGA Modules Overview

The TE0720-03-61Q33MA is an industrial-grade System on Module (SoM) by Trenz Electronic GmbH, built around the Xilinx Zynq-7000 SoC. It integrates a dual-core ARM Cortex-A9 processing system and an Artix-7 FPGA fabric with up to 85K logic cells. The module includes up to 1 GB of DDR3/L SDRAM, 32 MB Quad SPI flash, and eMMC storage. Connectivity features include a Marvell Gigabit Ethernet PHY and a Microchip USB ULPI transceiver. A Lattice System Controller CPLD manages power sequencing and peripheral control.

Microcontrollers, Microprocessor, FPGA Modules Feature Summary

• Xilinx Zynq XC7Z020 SoC with dual-core ARM Cortex-A9 and Artix-7 FPGA
• Up to 1 GB DDR3/L SDRAM and 32 MB Quad SPI Flash memory
• Marvell 88E1512 Gigabit Ethernet PHY and Microchip USB3320C ULPI PHY
• Lattice LCMXO2-1200HC System Controller CPLD for power management

Microcontrollers, Microprocessor, FPGA Modules Applications

• Industrial automation and control systems
• Embedded computing platforms requiring mixed programmable logic
• High-speed data acquisition and signal processing applications

Microcontrollers, Microprocessor, FPGA Modules Procurement Notes

Verify the specific memory configuration and component revisions against the manufacturer's current production variants list. Confirm that the carrier board design supports the required power distribution and B2B connector mating heights. Ensure compliance with export regulations if applicable.

Microcontrollers, Microprocessor, FPGA Modules Selection Notes

Select this module when a combination of high-performance ARM processing and flexible FPGA logic is required in a compact form factor. Consider the TE0720-03-61Q33MA variant specifically for its defined memory and connectivity specifications. Evaluate thermal requirements as the module utilizes switching-mode power supplies.

Microcontrollers, Microprocessor, FPGA Modules Part Context

This part belongs to the TE0720 family of Zynq-based modules from Trenz Electronic. It utilizes rugged Samtec Razor Beam connectors for board-to-board interfacing. The module is designed for industrial environments with wide operating temperature ranges and shock resistance.

Microcontrollers, Microprocessor, FPGA Modules Replacement Considerations

No direct public substitutes are documented. Alternative solutions require redesigning the carrier board interface and software stack due to the unique integration of the Zynq SoC and custom CPLD management logic.

Microcontrollers, Microprocessor, FPGA Modules FAQ

What is the boot mode selection mechanism?

Boot mode is determined by the MODE input signal on the B2B JM1 connector. High or open state selects QSPI boot, while low or ground connection selects SD Card boot.

How is the MAC address handled?

A pre-programmed globally unique 48-bit node address is stored in the 11AA02E48 serial EEPROM, accessible via the System Controller CPLD.

What is the function of the System Controller CPLD?

The Lattice LCMXO2-1200HC CPLD manages power-on sequences, monitors supply stability, controls DC-DC converters, and acts as an I2C bus repeater for onboard peripherals.