TI375N1156I3

Field Programmable Gate Array Overview

The Efinix TI375N1156I3 is a Field Programmable Gate Array (FPGA) belonging to the Titanium series, manufactured using a 16nm standard process. This device integrates four hard-core RISC-V processors operating at up to 1GHz and provides extensive high-speed connectivity through sixteen pairs of 16Gbps SerDes transceivers alongside two PCIe Gen4 x4 interfaces. It features dedicated hardware blocks for video processing, including MIPI DPHY support, and incorporates LPDDR4/LPDDR4X controllers capable of reaching 3.7Gbps data rates. The architecture delivers approximately 370K logic units with optimized DSP and BRAM resources, designed to balance performance with low power consumption for edge computing applications.

Field Programmable Gate Array Feature Summary

• Integrates four hard-core RISC-V processors to enable efficient network protocol handling and system operation without intellectual property licensing risks.
• Supports high-bandwidth communication via sixteen 16Gbps SerDes lanes and dual PCIe Gen4 x4 interfaces with dynamic configuration capabilities.
• Includes hardened MIPI DPHY and LPDDR4/LPDDR4X controllers to accelerate video data acquisition and provide high external memory bandwidth.

Field Programmable Gate Array Applications

• Edge AI inference and machine vision systems requiring low-latency data processing.
• Industrial automation controllers utilizing RISC-V for real-time control and FPGA fabric for custom logic.
• High-speed serial communication gateways leveraging PCIe Gen4 and SerDes transceivers.
• Video surveillance endpoints integrating MIPI camera inputs with Ethernet transmission.

Field Programmable Gate Array Procurement Notes

Verify the specific suffix 'I3' against official Efinix documentation to confirm the exact temperature range and commercial qualification status. Ensure that the ordering information matches the required package type and pin compatibility for your target PCB design. Cross-reference the latest datasheet to validate any recent revisions or updates to the Titanium series specifications before finalizing procurement.

Field Programmable Gate Array Selection Notes

Select this component when an application requires a heterogeneous SoC combining programmable logic with embedded RISC-V processing. It is suitable for designs needing significant I/O bandwidth through PCIe Gen4 and SerDes while minimizing board space by utilizing hardened memory and video interfaces. Consider the 16nm process node for its balance of density and power efficiency compared to older technologies.

Field Programmable Gate Array Part Context

The TI375N1156I3 is part of the Efinix Titanium family, which targets cost-sensitive yet high-performance embedded markets. This series distinguishes itself by embedding RISC-V cores directly into the FPGA fabric, allowing for flexible system architectures. The Titanium line competes in the segment requiring rapid prototyping and customization for industrial and consumer IoT devices.

Field Programmable Gate Array Replacement Considerations

Direct pin-to-pin replacements are not publicly documented for this specific Titanium variant. Evaluate alternative FPGAs from vendors such as Lattice or Microchip if comparable hard processor systems and SerDes counts are required. Verify that any substitute supports similar LPDDR4 and MIPI PHY implementations to maintain existing software drivers and hardware constraints.