TLP2361(TPR,E

Logic Output Optoisolators Overview

The TLP2361(TPR,E) is a high-speed optocoupler featuring an inverter logic type with a totem pole output. It provides a data rate of 15 MBd and supports a maximum forward current of 2 mA. The device offers an isolation voltage of 3750 Vrms and a common mode transient immunity of 20 kV/µs. Electrical characteristics include a typical forward voltage of 1.5 V, reverse voltage of 5 V, and output current of 10 mA. Propagation delay is limited to 80 ns for both low-to-high and high-to-low transitions. Rise and fall times are typically 3 ns. Power dissipation is rated at 40 mW.

Logic Output Optoisolators Feature Summary

• High-speed operation with 15 MBd data rate capability
• Robust electrical isolation with 3750 Vrms insulation voltage
• High common mode transient immunity of 20 kV/µs
• Totem pole output configuration for direct logic interfacing

Logic Output Optoisolators Applications

• High-speed digital signal transmission across isolated boundaries
• Interface circuits requiring fast switching speeds
• Data communication systems with galvanic isolation requirements

Logic Output Optoisolators Procurement Notes

Verify the specific suffix (TPR,E) against the manufacturer's official datasheet to confirm package type and tape-and-reel specifications. Ensure the component meets required safety certifications such as UL1577 or EN60747-5-5 if applicable to the end equipment. Cross-reference the ordering part number with authorized distributors to avoid counterfeit components.

Logic Output Optoisolators Selection Notes

Select this component when a totem pole output is required for direct logic interface without additional pull-up resistors. The 15 MBd speed makes it suitable for applications demanding faster response than standard optocouplers. Consider the 2 mA forward current requirement for drive circuit design. Verify that the SOP-5 package fits the available PCB footprint constraints.

Logic Output Optoisolators Part Context

This device belongs to Toshiba's TLP series of high-speed optocouplers. It is designed for applications requiring fast signal transfer between isolated circuits. The inverter logic type distinguishes it from non-inverting variants within the same family. It serves as a solution for noise-immune digital communication links.

Logic Output Optoisolators Replacement Considerations

Check for TLP2361 variants with different suffixes for packaging differences. Compare technical parameters with other high-speed optocouplers offering similar data rates and isolation voltages. Ensure pinout compatibility before substituting with devices from other manufacturers.