TLP360J(D4-CANO)

Description：OPTOISOLATOR 5KV TRIAC 1CH 4-DIP
Series：-
Mfr：Toshiba Semiconductor and Storage
Package：Bulk

SKU:3b2cb0d846a2 Category: Triac, SCR Output Optoisolators Brand: Toshiba Semiconductor and Storage

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

TLP360J(D4-CANO) is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists Toshiba Semiconductor and Storage. Its product description is OPTOISOLATOR 5KV TRIAC 1CH 4-DIP. Review the specifications below when checking this part for your BOM.

Triac, SCR Output Optoisolators specifications for TLP360J(D4-CANO)

Description：OPTOISOLATOR 5KV TRIAC 1CH 4-DIP
Series：-
Mfr：Toshiba Semiconductor and Storage
Package：Bulk
Output Type：Triac
Zero Crossing Circuit：No
Number of Channels：1
Voltage - Isolation：5000Vrms
Voltage - Off State：600 V
Static dV/dt (Min)：500V/µs (Typ)
Current - LED Trigger (Ift) (Max)：10mA
Current - On State (It (RMS)) (Max)：100 mA
Current - Hold (Ih)：1mA
Turn On Time：30µs
Voltage - Forward (Vf) (Typ)：1.15V
Current - DC Forward (If) (Max)：50 mA
Operating Temperature：-40°C ~ 100°C
Mounting Type：Through Hole
Package / Case：4-DIP (0.300", 7.62mm)
Supplier Device Package：4-DIP
Approval Agency：CQC, cUL, UL, VDE

Triac, SCR Output Optoisolators datasheet and documents for TLP360J(D4-CANO)

TLP360J(D4-CANO)

Triac, SCR Output Optoisolators Overview

The TLP360J(D4-CANO) is a single-channel triac output optoisolator manufactured by Toshiba Semiconductor and Storage. It integrates a gallium arsenide infrared-emitting diode with a photo-triac in a four-lead plastic DIP package. The device features a minimum peak off-state voltage of 600 V and supports a maximum on-state current of 100 mA. It provides a minimum isolation voltage of 5000 Vrms between input and output circuits. The component operates within a temperature range of -25 °C to 85 °C.

Triac, SCR Output Optoisolators Feature Summary

Integrates a GaAs infrared LED with a photo-triac for signal transmission
Provides high-voltage electrical isolation between control and load circuits
Designed for direct driving of AC loads without zero-crossing detection

Triac, SCR Output Optoisolators Applications

Solid State Relays (SSR)
Programmable Controllers
AC Output Modules

Triac, SCR Output Optoisolators Procurement Notes

Verify the specific suffix configuration against official Toshiba documentation, as variations such as CANO or IFT7 may indicate different packaging or reel specifications. Confirm that the required insulation voltage ratings meet the safety standards of the target application environment before finalizing procurement orders.

Triac, SCR Output Optoisolators Selection Notes

Select this component when an optoisolator capable of switching AC loads up to 100 mA is required without zero-crossing functionality. Ensure the application demands a minimum isolation voltage of 5000 Vrms and can accommodate the specified operating temperature range. This part is suitable for general-purpose AC switching where precise timing synchronization is not critical.

Triac, SCR Output Optoisolators Part Context

This device belongs to the TLP360J family of photocouplers designed for industrial and consumer applications. It serves as a bridge between low-voltage DC control logic and higher-voltage AC power stages. The DIP-4 package facilitates easy integration into standard printed circuit board layouts for compact electronic designs.