SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
TRF3750IPW is listed in the Clock Generators, PLLs, Frequency Synthesizers range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC PLL FREQ SYNTH 16TSSOP. Review the specifications below when checking this part for your BOM.
The TRF3750IPW is a high-performance integer-N PLL frequency synthesizer designed for wireless transceiver local oscillators. It covers frequencies up to 2.4 GHz with dual supply ranges of 3 V–3.6 V and 4.5 V–5.5 V, plus a separate charge pump supply (VCP) up to 8 V. Key parameters include a 14-bit R counter, 6-bit A counter, and 13-bit B counter. At 900 MHz with N=4500, phase noise is -91 dBc/Hz at 1 kHz offset. Supply currents are 10 mA (AVDD @ 3.3 V), 3 mA (DVDD @ 3.3 V), and 7.5 mA (VCP @ 7 V). It features a 3-wire serial interface and lock detect outputs.
Verify the specific package marking and ordering suffix against the manufacturer's latest datasheet revision SLWS146B. Confirm that the AVDD/DVDD and VCP supply voltages match the design requirements before integration. Ensure ESD handling procedures are followed during installation to prevent damage to the precision integrated circuit.
Select this component when designing local oscillators requiring ultra-low phase noise up to 2.4 GHz. The device accommodates various external VCOs via the extended VCP supply range. Consider the available prescaler options and counter bit-widths to ensure the desired frequency step size and output range are achievable within the specified operating temperature range.
The TRF3750IPW belongs to the TRF3750 family of integer-N PLL frequency synthesizers from Texas Instruments. It is packaged in a 16-pin TSSOP Thin Quad FlatPack (PW designator). Other variants in the series include the QFN package version (TRF3750IRGP) and tape-and-reel options (TRF3750IPWR).
Public confirmed substitute part numbers: TRF3750IPWG4.
The maximum charge pump current is controlled by an external resistor (RSET) connected from the RSET pin to ground. For example, a 4.7-kΩ resistor provides approximately 5 mA.
The device supports four dual-modulus prescaler settings: 8/9, 16/17, 32/33, and 64/65.
Fastlock Mode switches the charge pump to a preprogrammed higher current setting (Setting 2) to speed up locking. It can revert to normal operation either via software control (Mode 1) or after a timer expires (Mode 2).
Explore related parts through Clock/Timing, Integrated Circuits (ICs), all product categories, ChipApex homepage.