VS-ST730C20L0

Description：SCR 2KV 2000A B-PUK
Series：-

SKU:4dadeb0719c5 Category: SCRs Brand: Vishay General Semiconductor - Diodes Division

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

VS-ST730C20L0 is listed in the Scrs range at ChipApex. The manufacturer field lists Vishay General Semiconductor - Diodes Division. Its product description is SCR 2KV 2000A B-PUK. Review the specifications below when checking this part for your BOM.

Scrs specifications for VS-ST730C20L0

Description：SCR 2KV 2000A B-PUK
Series：-
Mfr：Vishay General Semiconductor - Diodes Division
Package：Bulk
Voltage - Off State：2 kV
Voltage - Gate Trigger (Vgt) (Max)：3 V
Current - Gate Trigger (Igt) (Max)：200 mA
Current - Hold (Ih) (Max)：600 mA
Current - Non Rep. Surge 50, 60Hz (Itsm)：15000A, 15700A
SCR Type：Standard Recovery
Operating Temperature：-40°C ~ 125°C
Grade：-
Qualification：-
Mounting Type：Clamp On
Package / Case：TO-200AC, B-PUK
Supplier Device Package：TO-200AC, B-PUK
Voltage - On State (Vtm) (Max)：1.62 V
Current - On State (It (AV)) (Max)：990 A
Current - On State (It (RMS)) (Max)：2000 A
Current - Off State (Max)：80 mA

Scrs datasheet and documents for VS-ST730C20L0

VS-ST730C20L0

Scrs Overview

The VS-ST730C20L0 is a silicon controlled rectifier (SCR) manufactured by Vishay General Semiconductor - Diodes Division. It features a standard recovery characteristic and is housed in a TO-200AC, B-PUK package. The device is rated for a repetitive peak off-state voltage of 2 kV and a maximum on-state current of 2000 A. These specifications define its electrical limits within the component's operational envelope.

Scrs Feature Summary

Standard recovery performance characteristics
High current handling capability up to 2000 A
Robust voltage blocking rating of 2 kV

Scrs Applications

Industrial power control systems
High voltage DC switching applications
Motor drive circuits requiring high surge tolerance

Scrs Procurement Notes

Verify the specific suffix codes against official Vishay documentation to ensure correct pinout and thermal characteristics. Confirm that the TO-200AC B-PUK package matches your mechanical constraints. Cross-reference the 2 kV and 2000 A ratings with your circuit design requirements to ensure adequate safety margins under transient conditions.

Scrs Selection Notes

Select this component when high current capacity and robust voltage blocking are required in a single-phase SCR configuration. Ensure the application environment supports the thermal dissipation needs of the TO-200AC package. Validate that the standard recovery speed aligns with the switching frequency demands of the target circuit without causing excessive losses.

Scrs Part Context

This part belongs to the VS-ST730 series of silicon controlled rectifiers from Vishay. The series is designed for high-power industrial applications. The VS-ST730C20L0 variant specifically addresses scenarios requiring 2 kV blocking capability and significant on-state current handling within a standardized industrial package format.