XGZP6859A200KPG33

Pressure Sensors Transducers Overview

The XGZP6859A200KPG33 is a calibrated silicon pressure sensor from CFSensor, designed for gauge pressure measurement with a range of -100kPa to 200kPa. It operates on a 3.3V DC supply (3.3V to 3.6V) and consumes less than 2mA current. The device provides an analog output voltage ranging from 0.2V to 2.7V. Total accuracy is specified at ±2% FSS for pressures between 10kPa and 200kPa, and ±2.5% FSS otherwise. Long-term stability is ±0.5% FSS over 1000 hours at 25°C. It features temperature compensation within the 0°C to +60°C operating range.

Pressure Sensors Transducers Feature Summary

• Incorporates a silicon piezoresistive sensor and ASIC for ratiometric analog signal output
• Fully calibrated and temperature compensated for specified span
• Designed for non-corrosive gases and air applications

Pressure Sensors Transducers Applications

• Medical healthcare devices
• Industrial automation systems
• Domestic appliances
• Consumer electronics
• Automotive electronic systems

Pressure Sensors Transducers Procurement Notes

Verify the specific pressure range suffix (e.g., 200KPG) matches the required full-scale span. Confirm the package type (SMD Module) and pinout compatibility with the target PCB layout. Ensure the supply voltage aligns with the 3.3V requirement. Check that the operating environment stays within the specified temperature limits. Validate interface requirements as this model provides analog output, not digital I2C.

Pressure Sensors Transducers Selection Notes

Select this component when a low-cost, calibrated analog gauge pressure sensor is needed for air or non-corrosive gas. It is suitable for microcontroller-based systems requiring A/D input. Consider the XGZP6847D if a digital I2C interface is preferred instead of analog. Ensure the application does not require differential pressure measurement, which utilizes the XGZP68xx series. Verify that the ±2% FSS accuracy meets system precision needs.

Pressure Sensors Transducers Part Context

This part belongs to the XGZP68xx series of calibrated pressure sensors by CFSensor. The series includes variants with different pressure ranges and interfaces, such as the XGZP6847A (analog) and XGZP6847D (I2C). The 'A' suffix typically denotes analog output, while 'D' indicates digital I2C. The '33' in the model number specifies the 3.3V supply version.

Pressure Sensors Transducers Replacement Considerations

The XGZP6847A is a functional alternative offering similar analog performance but may differ in supply voltage options (5V/3.3V) and specific pressure ranges. The XGZP6859D provides a digital I2C interface instead of analog output. Direct substitution requires verifying pin compatibility and electrical parameter alignment.