ADF4360-6BCPRL7

Overview

The ADF4360-6BCPRL7 is an integer-N frequency synthesizer and voltage-controlled oscillator (VCO) from Analog Devices, designed for a center frequency of 1150 MHz. It operates within an output frequency range of 1050 MHz to 1250 MHz and supports a divide-by-2 option for outputs between 525 MHz and 625 MHz. The device integrates a programmable dual-modulus prescaler, phase-frequency detector, charge pump, and VCO core. It functions on a 3.0 V to 3.6 V power supply with 1.8 V logic compatibility. Key electrical specifications include a typical VCO phase noise of -110 dBc/Hz at 100 kHz offset and an output power level programmable in 3 dB steps from -13.5 dBm to -4.5 dBm.

Feature Summary

• Integrated integer-N synthesizer and VCO covering 1050 MHz to 1250 MHz
• Programmable dual-modulus prescaler options: 8/9, 16/17, or 32/33
• Low phase noise performance: -110 dBc/Hz typ at 100 kHz offset
• 3-wire serial interface with hardware and software power-down modes

Applications

• Wireless handsets (DECT, GSM, PCS, DCS, WCDMA)
• Test equipment local oscillators
• Wireless LANs
• CATV equipment

Procurement Notes

Verify the specific suffix 'RL7' against the manufacturer's official ordering guide to confirm reel packaging quantity and tape specifications. Ensure the B-version designation matches the required silicon revision for your design. Cross-reference the datasheet Rev. C document for any updates to absolute maximum ratings or thermal impedance values before finalizing procurement.

Selection Notes

Select this component when a fixed L-band frequency around 1150 MHz is required. Consider the divide-by-2 feature if a 525–625 MHz output is needed. Evaluate the programmable output power levels (-13.5 dBm to -4.5 dBm) against load requirements. Verify that the reference input frequency range (10 MHz to 250 MHz) aligns with the system clock source. Check the operating temperature range of -40°C to +85°C for environmental compliance.

Part Context

The ADF4360-6 is part of the broader ADF4360 family of integrated synthesizers and VCOs produced by Analog Devices. Other variants in this series, such as the ADF4360-0, ADF4360-1, and ADF4360-5, cover different frequency bands ranging from sub-GHz to multi-GHz ranges. This specific model targets the L-band spectrum, distinguishing it from higher-frequency counterparts like the ADF4360-8.

Replacement Considerations

Direct pin-compatible replacements within the same package may include other ADF4360 family members if the frequency band matches, though most variants target different RF ranges. For identical frequency coverage, verify if ADF4360-6BCPZ (tray package) is available if reel packaging is not strictly required. No other direct substitutes are confirmed in the provided documentation.