BC560_J35Z

$0.04

Description：TRANS PNP 45V 0.1A TO-92-3
Series：-

SKU:1d73094df66c Category: Single Bipolar Transistors Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

BC560_J35Z is listed in the Single Bipolar Transistors range at ChipApex. The manufacturer field lists onsemi. Its product description is TRANS PNP 45V 0.1A TO-92-3. Review the specifications below when checking this part for your BOM.

Single Bipolar Transistors specifications for BC560_J35Z

Description：TRANS PNP 45V 0.1A TO-92-3
Series：-
Mfr：onsemi
Package：Bulk
Transistor Type：PNP
Current - Collector (Ic) (Max)：100 mA
Voltage - Collector Emitter Breakdown (Max)：45 V
Vce Saturation (Max) @ Ib, Ic：650mV @ 5mA, 100mA
Current - Collector Cutoff (Max)：15nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce：110 @ 2mA, 5V
Power - Max：500 mW
Frequency - Transition：150MHz
Operating Temperature：150°C (TJ)
Mounting Type：Through Hole
Package / Case：TO-226-3, TO-92-3 (TO-226AA) Formed Leads
Supplier Device Package：TO-92-3

Single Bipolar Transistors datasheet and documents for BC560_J35Z

BC560_J35Z

Single Bipolar Transistors Overview

The BC560_J35Z is a PNP silicon small-signal transistor manufactured by onsemi. It features a maximum collector-emitter voltage of -45 V and a continuous collector current of -100 mA. The device operates with a transition frequency up to 250 MHz and dissipates 625 mW of power. It utilizes a TO-92 (TO-226AA) through-hole package. The component is designed for low-noise amplifier applications, offering high DC current gain.

Single Bipolar Transistors Feature Summary

Engineered for low-noise performance in signal amplification circuits
Utilizes planar epitaxial silicon construction for reliability
Designed as the complementary counterpart to the BC540 series NPN transistors

Single Bipolar Transistors Applications

Low noise audio pre-amplifiers
General purpose signal switching
Complementary driver stages

Single Bipolar Transistors Procurement Notes

Verify the specific suffix J35Z against the official onsemi datasheet to confirm pinout orientation and tape-and-reel specifications. Ensure the procurement source provides documentation confirming RoHS compliance status for this specific marking code variant.

Single Bipolar Transistors Selection Notes

Select this component when a PNP transistor with low noise characteristics is required for general-purpose amplification. It serves as the direct complement to the BC540 series. Verify that the TO-92 package dimensions and thermal dissipation requirements align with the target circuit design constraints.

Single Bipolar Transistors Part Context

This part belongs to the BC5xx series of low-noise PNP transistors produced by onsemi. The series is widely recognized for its use in audio and RF applications where signal integrity is critical. The BC560 specifically complements the BC540 NPN device, allowing for matched pairs in differential or push-pull configurations.