BDP50-16

Single Bipolar Transistors Overview

The Diotec Semiconductor BDP50-16 is an SMD power PNP transistor housed in a SOT-223 package. It supports a collector current of -3 A and a peak collector current of 6 A for pulses up to 10 ms. The device features a collector-emitter voltage of -60 V and a collector-base voltage of 80 V. Power dissipation reaches 5 W with the case temperature at or below 100°C, or 2 W on a PCB with a 625 mm² copper pad. DC current gain ranges from 100 to 300 for Group -16. The junction temperature spans -55°C to +150°C.

Single Bipolar Transistors Feature Summary

• High collector current capability
• Low saturation voltage
• Two current gain groups

Single Bipolar Transistors Applications

• Switching
• AF Amplification
• Driver and output stages

Single Bipolar Transistors Procurement Notes

Verify the specific ordering suffix against official documentation to confirm compliance status. Standard versions are commercial/industrial grade. Suffixes -Q indicate AEC-Q101 compliance, while -AQ indicates AEC-Q101 qualification. Confirm RoHS, REACH, and conflict mineral declarations match project requirements before procurement.

Single Bipolar Transistors Selection Notes

Select this component for applications requiring high collector current and low saturation voltage in a compact SOT-223 package. Ensure thermal management allows for the specified power dissipation limits based on ambient temperature and mounting conditions. Verify that the required current gain falls within the standard or specific group parameters defined in the datasheet.

Single Bipolar Transistors Part Context

This component belongs to the Diotec BDP series of SMD power PNP transistors. It is designed for general-purpose switching and amplification tasks in commercial and industrial environments. The series includes complementary NPN variants and automotive-grade options with specific suffixes.

Single Bipolar Transistors Replacement Considerations

BDP49-16

Single Bipolar Transistors FAQ

What is the maximum peak collector current?

The maximum peak collector current (ICM) is 6 A for pulses with a duration tp ≤ 10 ms.

How does the power dissipation vary?

Power dissipation is 5 W when the case temperature (TS) is ≤ 100°C, and 2 W when mounted on a PCB with a 625 mm² copper pad at terminal 4.

What do the suffixes -Q and -AQ signify?

Suffix -Q denotes AEC-Q101 compliance, and suffix -AQ denotes AEC-Q101 qualification.