CS19-12HO1C

Description：SCR 1.2KV 35A ISOPLUS220
Series：-

SKU:14d065448e5a Category: SCRs Brand: IXYS

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

Product Detailed Parameters

Description：SCR 1.2KV 35A ISOPLUS220
Series：-
Mfr：IXYS
Package：Tube
Voltage - Off State：1.2 kV
Voltage - Gate Trigger (Vgt) (Max)：1.5 V
Current - Gate Trigger (Igt) (Max)：25 mA
Current - Hold (Ih) (Max)：50 mA
Current - Non Rep. Surge 50, 60Hz (Itsm)：100A, 105A
SCR Type：Standard Recovery
Operating Temperature：-40°C ~ 125°C
Grade：-
Qualification：-
Mounting Type：Through Hole
Package / Case：ISOPLUS220™
Supplier Device Package：ISOPLUS220™
Voltage - On State (Vtm) (Max)：1.65 V
Current - On State (It (AV)) (Max)：13 A
Current - On State (It (RMS)) (Max)：35 A
Current - Off State (Max)：1 mA

Download product information

CS19-12HO1C

Overview

The IXYS CS19-12HO1C is a phase control thyristor (SCR) housed in an ISOPLUS220 package with an electrically isolated back surface. It features a silicon chip on a Direct-Copper-Bond substrate for high power dissipation and provides 2500 V electrical isolation between the cathode and mounting tab. The device supports a repetitive peak reverse voltage of 1200 V and an RMS on-state current of 35 A. Maximum average on-state current is rated at 13 A at a case temperature of 85°C. Non-repetitive surge currents reach up to 105 A, while critical di/dt ratings are specified at 100 A/µs under repetitive conditions. Operating junction temperature ranges from -40°C to +125°C.

Feature Summary

Electrically isolated mounting surface utilizing Direct-Copper-Bond substrate technology
High thermal performance enabled by low cathode-to-tab capacitance
Planar passivated chips ensuring long-term stability of leakage current and blocking voltage

Applications

Motor control systems
Power converters
AC power controllers
Light and temperature control circuits
Inrush current limiting in power supplies or AC drives

Procurement Notes

Verify component authenticity through authorized IXYS distributors or certified suppliers. Confirm datasheet revision status as the document indicates phase-out status. Ensure packaging integrity matches ISOPLUS220 specifications. Check for UL 94V-0 epoxy compliance if required by application standards. Validate thermal interface material compatibility for optimal heat dissipation.

Selection Notes

Select this component when high-voltage isolation is required between the circuit and heatsink. Evaluate thermal resistance values against system cooling capabilities. Consider gate trigger current limits for driver compatibility. Assess surge current requirements against expected load transients. Verify operating temperature range suitability for the specific environment.

Part Context

This part belongs to the CS19 series of phase control thyristors manufactured by IXYS. The series includes variants with different voltage ratings such as 800 V and 1200 V options. These devices share common packaging and isolation features designed for industrial power applications requiring robust switching capabilities.