FP15R12W1T7B3BOMA1

Overview

The FP15R12W1T7_B3 is an EasyPIM module integrating TRENCHSTOP IGBT7 and emitter-controlled diodes. It features a 1200 V collector-emitter voltage (VCES) and a nominal continuous DC collector current of 15 A at 125°C heatsink temperature, with a repetitive peak current of 30 A. The saturation voltage (VCE,sat) is typically 1.60 V at 25°C. The module includes a rectifier section rated for 1600 V reverse voltage and incorporates an NTC thermistor with a typical resistance of 5 kΩ at 25°C. Operating junction temperatures range from -40°C to 175°C.

Feature Summary

• Integrates TRENCHSTOP IGBT7 technology with low saturation voltage for optimized switching performance.
• Includes an integrated NTC thermistor for precise thermal monitoring within the power cycle.
• Features solder contact technology with an Al2O3 substrate to ensure high power density and low thermal resistance.
• Provides 2.5 kV AC insulation for one minute, ensuring basic isolation compliance.

Applications

• Air conditioning systems
• Auxiliary inverters
• Motor drives

Procurement Notes

Verify the specific ordering suffix against official Infineon documentation to confirm mechanical and electrical configurations. Ensure compatibility with recommended gate drivers listed in the manufacturer's GDFinder tool. Confirm that the application environment meets the industrial qualification standards defined by IEC 60747, 60749, and 60068 before deployment.

Selection Notes

Select this component for applications requiring moderate current levels up to 15 A with high reliability. The 1200 V rating suits standard three-phase inverter topologies. Consider the 175°C operating capability for overload scenarios, referencing application note AN 2018-14 for detailed specifications beyond 150°C junction temperature limits.

Part Context

This module belongs to the EasyPIM family utilizing the seventh generation of TRENCHSTOP IGBT technology. It combines power switches, anti-parallel diodes, and a rectifier bridge into a single compact package. The design targets industrial applications where space constraints and thermal efficiency are critical factors for system performance.

Replacement Considerations

Consult the official datasheet for direct pin-compatible alternatives within the EasyPIM series. Verify that any substitute maintains the same voltage ratings, current capabilities, and thermal characteristics to ensure circuit integrity without redesigning the cooling or drive infrastructure.

FAQ

What is the maximum allowable junction temperature for operation?

The maximum operating junction temperature is 175°C. Operation above 150°C is permitted under overload conditions as specified in application note AN 2018-14.

Does the module include thermal protection components?

Yes, the module integrates an NTC thermistor with a typical resistance of 5 kΩ at 25°C to facilitate accurate temperature monitoring.

What is the insulation voltage rating of the module?

The module provides an isolation test voltage of 2.5 kV RMS for one minute at 50 Hz, establishing basic insulation according to IEC 61140.