FP50R12N2T7PB11BPSA1

Overview

The FP50R12N2T7P_B11 is an EconoPIM™2 power module integrating TRENCHSTOP™ IGBT7 technology with emitter-controlled diodes. It features a 1200 V collector-emitter voltage rating and a nominal continuous DC collector current of 50 A, with a repetitive peak current capability of 100 A. The module includes an integrated NTC thermistor for temperature monitoring and utilizes PressFIT contact technology for board mounting. It operates with a maximum junction temperature of 175°C and includes pre-applied thermal interface material.

Feature Summary

• Utilizes TRENCHSTOP™ IGBT7 technology for low saturation voltage and high efficiency.
• Incorporates emitter-controlled diodes to reduce reverse recovery losses.
• Features PressFIT contact technology for reliable mechanical connection without soldering.
• Includes an integrated NTC temperature sensor for precise thermal management.

Applications

• Auxiliary inverters
• Motor drives
• Servo drives

Procurement Notes

Verify the specific ordering suffix B11 corresponds to the required PressFIT and NTC configuration. Confirm that the application environment meets the industrial qualification standards defined in IEC 60747, 60749, and 60068. Ensure proper handling procedures are followed regarding the pre-applied thermal interface material during storage and shipment to maintain performance integrity.

Selection Notes

Select this module for applications requiring high power density and robust thermal cycling capability. The 1200 V rating suits medium-voltage inverter designs. Consider the 50 A nominal current limit per connector pin when designing busbar connections. The integrated NTC simplifies thermal protection circuit design compared to modules requiring external sensors.

Part Context

This component belongs to Infineon's EconoPIM™2 family, designed for compact power conversion systems. It combines IGBTs and diodes in a single insulated module. The TRENCHSTOP™7 generation offers improved switching characteristics over previous technologies. The PressFIT variant eliminates solder joints, enhancing reliability in high-vibration environments.

Replacement Considerations

Direct replacements must match the 1200 V rating, 50 A current capacity, and EconoPIM™2 footprint. Verify compatibility of the PressFIT pins with the target PCB layout. Ensure any substitute module supports the same 175°C junction temperature operation and includes equivalent thermal resistance characteristics for heatsink design.