ISPLSI 1016EA-200LJ44

Complex Programmable Logic Devices Overview

The ispLSI 1016EA-200LJ44 is a high-density programmable logic device from Lattice Semiconductor, housed in a 44-pin PLCC package. It features E2CMOS technology with a maximum operating frequency of 200 MHz and a propagation delay of 4.5 ns. The device contains 2000 PLD gates, 96 registers, and 32 universal I/O pins plus one dedicated input. It supports user-selectable 3.3V or 5V I/O levels via the VCCIO pin and includes open-drain output options. Key capabilities include in-system programmability via IEEE 1149.1 JTAG, 100% boundary scan testability, and non-volatile reprogrammability for rapid prototyping.

Complex Programmable Logic Devices Feature Summary

• High-performance E2CMOS technology delivering 200 MHz fmax and 4.5 ns tpd
• User-selectable 3.3V or 5V I/O voltage levels through the VCCIO pin
• 100% IEEE 1149.1 boundary scan testability and ispJTAG in-system programming
• Programmable open-drain outputs and individual output slew rate control

Complex Programmable Logic Devices Applications

• Mixed-voltage system interface logic
• High-speed state machines and counters
• Address decoding and glue logic replacement
• In-system diagnostic and prototyping platforms

Complex Programmable Logic Devices Procurement Notes

Verify the specific speed grade suffix (200, 125, or 100) matches design timing requirements. Confirm the package type (J44 for PLCC, T44 for TQFP) aligns with PCB footprint specifications. Ensure the commercial temperature range (0°C to +70°C) is suitable for the intended operating environment. Check for any obsolete status or end-of-life notices from Lattice Semiconductor before finalizing procurement plans.

Complex Programmable Logic Devices Selection Notes

Select this component when designs require field-reconfigurable logic with mixed-voltage I/O support. The -200 speed grade is appropriate for applications needing up to 200 MHz clock frequencies. Consider the 96-register capacity and 32 I/O pins against design complexity. Verify that the 44-pin PLCC package fits the available board space and assembly constraints compared to the TQFP alternative.

Complex Programmable Logic Devices Part Context

This part belongs to the ispLSI 1016E family, offering enhanced features over the base 1016E model. It serves as a functional superset, adding user-selectable voltage levels and open-drain outputs. The device is designed to replace discrete glue logic and structured gate arrays, providing flexibility for both combinational and registered logic implementations within a single non-volatile chip.

Complex Programmable Logic Devices Replacement Considerations

The ispLSI 1016E is functionally compatible but lacks the user-selectable 3.3V/5V I/O and open-drain options. For higher density needs, consider the ispLSI 1032 series. New 5V designs are recommended to use the ispMACH 4A5 family according to manufacturer guidance.