LT6002CDHC#PBF

$6.27

Description：IC OPAMP GP 4 CIRCUIT 16DFN
Series：LT®
Mfr：Analog Devices Inc.
Package：Tube

SKU:a1a91ec906ca Category: Instrumentation, Op Amps, Buffer Amps Brand: Analog Devices Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

LT6002CDHC#PBF is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Analog Devices Inc.. Its product description is IC OPAMP GP 4 CIRCUIT 16DFN. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for LT6002CDHC#PBF

Description：IC OPAMP GP 4 CIRCUIT 16DFN
Series：LT®
Mfr：Analog Devices Inc.
Package：Tube
Amplifier Type：General Purpose
Number of Circuits：4
Output Type：Rail-to-Rail
Slew Rate：0.015V/µs
Gain Bandwidth Product：60 kHz
Current - Input Bias：2 nA
Voltage - Input Offset：500 µV
Current - Supply：13µA (x4 Channels)
Current - Output / Channel：10 mA
Voltage - Supply Span (Min)：1.8 V
Voltage - Supply Span (Max)：16 V
Operating Temperature：-40°C ~ 85°C
Mounting Type：Surface Mount
Package / Case：16-WFDFN Exposed Pad
Supplier Device Package：16-DFN (5x3)
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for LT6002CDHC#PBF

LT6002CDHC#PBF

Instrumentation, Op Amps, Buffer Amps Overview

The LT6002CDHC#PBF is a quad precision operational amplifier from Analog Devices, housed in a 16-lead DFN package. It operates on supply voltages ranging from 1.8V to 16V with a quiescent current of 13µA per amplifier. Key electrical specifications include a maximum input offset voltage of 900µV at 25°C and 1300µV over the full temperature range. The device features rail-to-rail input and output capabilities, a gain bandwidth product of 50kHz, and a slew rate of 15V/ms.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Rail-to-rail input and output stages enable full signal swing across the entire supply voltage range.
Micropower architecture ensures low quiescent current consumption for extended battery life.
Precision design guarantees low input offset voltage and drift for accurate signal processing.
Phase reversal protection prevents incorrect output polarity during extreme input conditions.

Instrumentation, Op Amps, Buffer Amps Applications

Gas sensing circuits
Portable instrumentation
Battery-powered systems
Low voltage signal processing

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific ordering suffix #PBF indicates lead-free compliance when sourcing this component. Confirm the CDHC designation corresponds to the commercial temperature grade (-40°C to 85°C) and the 16-lead DFN package type. Ensure compatibility with standard surface-mount assembly processes for the specified plastic DFN footprint.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this part for applications requiring multiple amplifiers in a compact form factor with strict power constraints. The quad configuration reduces board space compared to single or dual packages. Verify that the 50kHz gain bandwidth and 15V/ms slew rate meet the dynamic performance requirements of the target circuit design.

Instrumentation, Op Amps, Buffer Amps Part Context

This component belongs to the LT6000/LT6001/LT6002 family of micropower precision op amps. While the LT6000 offers a single channel and the LT6001 provides dual channels, the LT6002 integrates four amplifiers. The CDHC variant specifically denotes the commercial grade operating within the -40°C to 85°C range in a 16-lead DFN package.