MBR10100CT-E1

Diode Arrays Overview

The MBR10100CT-E1 is a high voltage dual Schottky rectifier manufactured by Diodes Incorporated, housed in a TO-220-3 (2) package. It features two independent diode legs with a peak repetitive reverse voltage of 100V and an average rectified forward current of 5A per leg. The maximum instantaneous forward voltage drop is 0.85V at +25°C with 5A current. Maximum reverse leakage current is 0.1mA at +25°C and 6.0mA at +125°C. The device supports an operating junction temperature range from -55°C to +150°C.

Diode Arrays Feature Summary

• Dual common-cathode configuration for efficient power conversion
• Guard-ring structure provides stress protection against over-voltage
• Low forward voltage drop reduces power loss and increases efficiency
• High surge current capability suitable for transient conditions

Diode Arrays Applications

• Power supply output rectification
• Power management circuits
• Instrumentation systems

Diode Arrays Procurement Notes

Verify the specific ordering suffix E1 confirms RoHS compliance when sourcing this component. Confirm the package type matches the required TO-220-3 (2) footprint for your design. Check the datasheet revision date to ensure alignment with your manufacturing standards. Ensure thermal management meets the specified junction-to-case resistance requirements for reliable operation under load.

Diode Arrays Selection Notes

Select this component for medium voltage applications requiring low switching losses and minimal noise. The dual common-cathode arrangement simplifies circuit layout compared to discrete single diodes. Consider the thermal characteristics and heat sinking requirements based on the expected case temperature and ambient conditions during continuous operation.

Diode Arrays Part Context

This part belongs to the MBR10100C series of high voltage power Schottky rectifiers. The series includes various package options such as TO-220F-3, TO-263-2, and TO-252-2. The E1 suffix specifically denotes RoHS compliance within the product lineup offered by Diodes Incorporated.

Diode Arrays Replacement Considerations

MBR10100CT-G1 serves as a verified alternative within the same series offering identical electrical specifications and package dimensions.

Diode Arrays FAQ

What is the maximum non-repetitive peak surge current?

The maximum non-repetitive peak surge current is 100A when applied at rated load conditions with a half-wave, single-phase, 60Hz surge.

How does the forward voltage drop change with temperature?

The maximum instantaneous forward voltage drop decreases from 0.85V at +25°C to 0.75V at +125°C when tested with 5A forward current.

Is the cathode connected to the mounting tab?

Yes, the datasheet specifies that the case material connects to the cathode terminal.