PSMN6R7-40MSDX

$1.16

Description：MOSFET N-CH 40V 50A LFPAK33
Series：-
Mfr：Nexperia USA Inc.
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:80c8ed0d3b05 Category: Single FETs, MOSFETs Brand: Nexperia USA Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

PSMN6R7-40MSDX is listed in the Single FETs, MOSFETs range at ChipApex. The manufacturer field lists Nexperia USA Inc.. Its product description is MOSFET N-CH 40V 50A LFPAK33. Review the specifications below when checking this part for your BOM.

Single FETs, MOSFETs specifications for PSMN6R7-40MSDX

Description：MOSFET N-CH 40V 50A LFPAK33
Series：-
Mfr：Nexperia USA Inc.
Package：Tape & Reel (TR),Cut Tape (CT)
FET Type：N-Channel
Technology：MOSFET (Metal Oxide)
Drain to Source Voltage (Vdss)：40 V
Current - Continuous Drain (Id) @ 25°C：50A (Tc)
Drive Voltage (Max Rds On, Min Rds On)：10V
Rds On (Max) @ Id, Vgs：6.7mOhm @ 20A, 10V
Vgs(th) (Max) @ Id：3.6V @ 1mA
Gate Charge (Qg) (Max) @ Vgs：22 nC @ 10 V
Vgs (Max)：±20V
Input Capacitance (Ciss) (Max) @ Vds：1642 pF @ 20 V
FET Feature：-
Power Dissipation (Max)：65W (Tc)
Operating Temperature：-55°C ~ 175°C (TJ)
Grade：-
Qualification：-
Mounting Type：Surface Mount
Supplier Device Package：LFPAK33
Package / Case：SOT-1210, 8-LFPAK33 (5-Lead)

Single FETs, MOSFETs datasheet and documents for PSMN6R7-40MSDX

PSMN6R7-40MSDX

Single FETs, MOSFETs Overview

The Nexperia PSMN6R7-40MSDX is a surface-mount N-channel enhancement mode MOSFET utilizing NextPower-S3 technology. It features a 40 V drain-source voltage rating and a maximum continuous drain current of 50 A at 25 °C mounting base temperature. The device exhibits a typical on-state resistance of 5.7 mΩ at 10 V gate drive and 20 A drain current. Total power dissipation reaches 65 W under specified thermal conditions, with an operating junction temperature range spanning from -55 °C to 175 °C.

Single FETs, MOSFETs Feature Summary

Avalanche rated with 100% testing for enhanced ruggedness
NextPower-S3 technology enables superfast switching with soft body-diode recovery
Low parasitic inductance and resistance for low EMI designs
Clip bonded and solder die attach construction without glue or wire bonds

Single FETs, MOSFETs Applications

Secondary side synchronous rectification
DC-to-DC converters
Brushless DC motor drive
LED lighting

Single FETs, MOSFETs Procurement Notes

Verify the specific ordering suffix against official Nexperia documentation to confirm package variant and reel specifications. Confirm that the component meets all required environmental standards and marking codes for your manufacturing process before finalizing procurement orders.

Single FETs, MOSFETs Selection Notes

Select this component for high-efficiency applications requiring operation at high switching frequencies. Ensure the PCB thermal design supports the required heat dissipation, as practical current limits are often determined by board layout and ambient temperature rather than the absolute maximum ratings alone.

Single FETs, MOSFETs Part Context

This device belongs to the PSMN6R7-40 series within Nexperia's portfolio of standard level N-channel MOSFETs. It is housed in the LFPAK33 (SOT1210) plastic package, designed for single-ended surface mounting with exposed leads for improved thermal performance and wave soldering compatibility.

Single FETs, MOSFETs Replacement Considerations

Consult official Nexperia substitution guides for verified alternatives. Do not assume functional equivalence with other logic level or automotive qualified variants without verifying specific electrical parameters and qualification standards.

Single FETs, MOSFETs FAQ

Is the PSMN6R7-40MSDX suitable for automotive applications?

No, unless explicitly stated otherwise in the datasheet, this product is not automotive qualified. It has not been tested according to automotive application requirements.